Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
15 Troubleshooting .............................................. 17 Specifications................................................. 18 Names And Functions n Control Panel q!9wertyuio!1!2!3!5THR10 !8!7!6 THR5 qw!7!6!8 e r t y !0 !1 !2 !4 l Block Diagram of Amp Simulation and Effects GUITAR OUTPUT VOLUME INPUT (Guitar) AUX USB USB (THR Guitar L, R) PHONES Speaker USB/AUX OUTPUTVOLUME USB (THR Guitar DI 1, 2) Compressor ReverbDelayEffectNoise GateAmp Simulation *THR10 only Amp Simulation/Effect Amp Simulation/Effect Names And Functions Names And Functions (Power Switch) This is the unit’s power switch. When the power is ON, the lamp corresponding to the selected amp type and the Power Lamp in the speaker cabinet light. * The Power Lamp in the speaker cabinet can be switched ON or OFF using the THR Editor. (page 16). w LED Display Indicates each of the THR’s settings and conditions. e TAP/TUNER n Tuner Function Holding the switch for 1 second engages the tuner function and lights the indicators. The tuner is calibrate to A4=440Hz. Tune the guitar until the pitch that you want to tune to appears in the display. Tuning is complete when only the in the center of the display is visible. Pitch is low In tune Pitch is high Press the TAP/TUNER switch (less than one second) to turn OFF the tuner function. * When the tuner function is set ON, guitar sound to the main speakers, PHONES, and USB is muted. Input received from the AUX and USB jacks is output. n Tap Tempo Function When a DLY or DLY/REV effect is selected with the DLY/REV !2 control, the tempo of the delay can be set by tapping (more than twice) on the switch. n Extended Stereo Setting Hold the switch for more than three seconds to switch the Extended Stereo* function ON/ OFF. ON: “#” on LED w is off (default setting). OFF: “#” on LED w is lit. * Extended Stereo: The Extended Stereo function produces a much wider stereo field. Extended Stereo effects the USB/AUX inputs as well as guitar sounds with DLY/REV or HALL effects applied. * The Extended Stereo setting (ON/OFF) is saved when the power is switched OFF. r AMP Selects the amp type. The lamp for the corresponding amp type lights. * When the power is switched ON, the most recent amp type is selected. [About amp types] THR’s GAIN t and MASTER y controls work in the same way as the preamp and master controls on a tube amp. The GAIN t control provides preamp gain and distortion while the MASTER y control affects power amp level. The response of the MASTER y control differs depending on the amp model used but it affects volume, gain and power amp compression.Using the GUITAR OUTPUT !3 control you can use the amp’s GAIN t and MASTER y controls to set your tone at any level. THR utilizes a newly designed amp-modeling technology using Yamaha’s Virtual Circuitry Modeling (VCM) technology. VCM gives THR the power to model real amps incredibly accurately, with each control working and responding exactly as it does on the real thing. CLEAN: Rich, clean tones from a 6L6 power section with gentle breakup for incredible jazz, blues and country sounds. * When the BASS, MIDDLE, and TREBLE controls are all set to 0, there is no guitar sound output. CRUNCH: Low-powered, class-A tube output with bright, clear, dynamic power amp distortion characteristics. Names And Functions Names And Functions BRIT HI: EL34s keep the classic British clarity while a higher gain preamp allows you to push the amp into serious distortion. MODERN: Ultra high-gain input section combined with 6L6 output section delivers smooth, powerful distortion and awesome power amp compression. * The following amp types are available only on the THR10. BASS: High-power all-tube design for dynamic, driving bass tone. ACO: Electro-acoustic optimized input with mic simulations for natural, clear tone. FLAT: Flat response clean input for line sources, tone and effect controls allow shaping of non-guitar sources. t GAIN Adjusts the amount of guitar distortion. Rotate the knob clockwise to increase the amount of distortion. * On the THR10, the blend function, which blends the pickup direct sound with the mic simulation sound, is active when ACO is selected with the AMP r control. (Setting the blend function to its minimum level produces the pickup direct sound only while a maximum setting produces the mic sound only.) y MASTER Adjusts the volume for the amp section. Rotate the knob clockwise to increase volume while reproducing compression and poweramp distortion of the simulated amp. * Only adjusts the volume when BASS, ACO, or FLAT is selected with the AMP r control (THR10 only). u BASS (THR10 only) Tone adjustment for the guitar’s sound. Rotate the knob clockwise to enhance the low range frequencies. i MIDDLE (THR10 only) Tone adjustment for the guitar’s sound. Rotate the knob clockwise to enhance the mid-range frequencies. o TREBLE (THR10 only) Tone adjustment for the guitar’s sound. Rotate the knob clockwise to enhance the high-range frequencies. !0 TONE (THR5 ...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - THR5 (V.2) (2.52 mb)