Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Q •WK-1800 (a) DEMO button (b) SYNTH button (c) TUNE/MIDI button (d) TOUCH RESPONSE button (e) DISK button •WK-1600/1630 (a) DEMO button (b) SYNTH button (c) TUNE button (d) MIDI button (e) TOUCH RESPONSE button R Percussion instrument indicators S Access lamp T Eject button U •WK-1800 PHONES terminal •WK-1600/1630 PHONES/OUTPUT terminal *Attaching the Score Stand Insert the music stand into the slot in the top of the keyboard. E-9 733A-E-011A WK-1800/1600(E)-08~15 Page 9 03.7.31, 5:20 PM Adobe PageMaker 6.5J/PPC GrandPno4 7532 8 96 1314 111217 10 18 19 1 1516 About the Display 1 DSP indicator Appears when a DSP effect is turned on. 2 TONE/RHYTHM indicator TONE is shown during tone selection and display, while RHYTHM is shown during rhythm selection and display. 3 Tone/Rhythm number Number of currently selected tone or rhythm. The TONE/ RHYTHM indicator shows whether the number is a tone or rhythm. This display area also shows other information when you are using the Pattern Sequencer and Song Sequencer. 4 Chord name display Shows chord names while Auto Accompaniment is being used. 5 Tone/Rhythm name Name of currently selected tone or rhythm. The TONE/ RHYTHM indicator shows whether the name is a tone or rhythm. This area also shows other information in other modes. 6 Record indicator While the Song Sequencer or Pattern Sequencer is turned on, this indicator flashes to indicate record standby and remains on the display without flashing while recording is in progress. 7 VOLUME indicator Appears when you are using the Mixer to change the volume parameter of a specific channel. 8 Cursor key indicators Indicated keys are those that are operational for the function you are currently performing. 9 Octave symbol 1 One symbol indicates the note being produced by the keyboard is one octave higher than the note shown in the staff notation area 10. Two symbols indicate two octaves higher. 10 Staff notation area Notes you play on the keyboard, notes played back from memory, chord forms, and received MIDI data* are shown here. 11 Octave symbol 2 One symbol indicates the note being produced by the keyboard is one octave lower than the note shown in the staff notation 12 Indicators An indicator appears to indicate that a function (Layer, Auto Harmonize, Split, General MIDI Mode, Touch Response) is currently in use. 13 Beat number Shows the beat number during rhythm and Auto Accompaniment play, and while the Song Sequencer or Pattern Sequencer is turned on. 14 Measure Shows the measure number from the start of play during rhythm and Auto Accompaniment play, and while the Song Sequencer or Pattern Sequencer is turned on. In the Mixer Mode, displays the current channel's on/off status. 15 Tempo indicator Shows the tempo as a value indicating the number of beats per minute during rhythm and Auto Accompaniment play, and while the Song Sequencer or Pattern Sequencer is turned on. This display area also shows other information in other modes. 16 Metronome You can turn on the metronome to provide a reference beat for your keyboard play. 17 Level meter The numbers 1 through 16 correspond to Mixer channels. The level meter indicates which channels are on and off, and also indicates the volume level. 18 Mixer mode indicator Indicates the current Mixer mode (Internal, External, External/ Solo, External/Play). 19 Graphic keyboard Notes you play on the keyboard, notes played back from memory, and received MIDI data* are indicated on the graphic keyboard. * Any receive data outside the range of E1 to G7 is not displayed. area 10. E-10 733A-E-012A WK-1800/1600(E)-08~15 Page 10 03.7.31, 5:20 PM Adobe PageMaker 6.5J/PPC .NOTES. • Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that appear on the display may differ from the examples shown in this User’s Guide. • Backlight brightness may appear somewhat unstable immediately after the keyboard is turned on. This does not indicate malfunction, and brightness will stabilize after a few seconds. The back lighting of the display is provided by a fluorescent light, which loses its brightness over very long periods of use. When this happens, contact your original dealer or a CASIO service provider about having the backlight replaced. Note that you will be charged for such replacement. Adjusting Display Contrast • Display contrast can be adjust to one of 100 levels for easy viewing. • Adjusting display contrast helps to make figures easier to read from any viewing angle. • Within five seconds after pressing the CONTRAST button, press [+] to increase the contrast value (making the display darker) or [–] to decrease it (making the display lighter). • After you release CONTRAST, the message “Contrast” remains on the display for a few moments, during which you can change the contrast setting further using [+] and [–] or by inputting a contrast value with the number keys. The contrast can be set to a value from 0 to 99. The initial defau...