Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
*2: Pad 1: Up a perfect fifth; Pad 2: Down a perfect fifth; Pad 3: Same as Set 1; Pad 4: Up a major third; Pad 5: Down a perfect fifth *3: Pads 1 and 5: Gradually rising pitch; Pad 2: Gradually falling pitch Example: When Set 2 is selected Pad Se t • While a sound set number is displayed, you can change it using bq (10-key). If you do not perform any operation for a few seconds after the indicator appears, the display will return to the previous screen automatically. Sounding Sampled Sounds with the Voice Pads Sampling sounds will change the tones assigned to sets 1 through 3 to the sampled sounds. For more information, see page E-12. Playing the Digital Keyboard Playing the Digital Keyboard Using the Metronome The metronome lets you play and practice along with a steady beat to help keep you on tempo. Start/Stop 1. Press 5. This starts the metronome. This pattern changes with each beat. 2. Press 5 again to stop the metronome. Changing the Beats per Measure You can configure the metronome to use a bell sound for the first beat of each measure of the song you are playing. • You can specify 0, or a value from 2 to 6 as the number of beat per measure. • When playing a built-in song, the beats per measure setting (which determines when the bell sounds) is configured automatically for the currently selected song. 1. Hold down 5 until the beats per measure setting screen appears on the display. Bea t • If you do not perform any operation for after the beats per measure setting screen appears, the display will return to the screen displayed before you pressed 5. 2. Use bq (10-key) to enter the number of beats per measure. • The bell will not sound if you specify 0 for this setting. In this case, all beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying how many beats there are in each measure. Changing the Metronome Tempo Use the following procedure to change the tempo of the metronome. 1. Press 6. Use w (slower) and q (faster) to change the tempo setting. Holding down either button changes the setting at high speed. • Pressing w and q at the same time will initialize the tempo setting in accordance with the currently selected song or rhythm. • Pressing 6 causes the tempo value to flash on the display. While the tempo value is flashing, you can use bq (10-key) to change it. Note that you must input leading zeros, so 89 is input as 089. • The tempo value will stop flashing if you do not perform any operation for a short while. Tempo value (flashes) Changing the Metronome Sound Volume The metronome volume setting is changed automatically with the volume level of the currently selected Auto Accompaniment or song. The metronome volume cannot be adjusted independently. • For information about changing the Auto Accompaniment volume, see page E-32. • For information about changing the song volume, see page E-18. • You cannot adjust the balance between the metronome and note volume during Auto Accompaniment and built-in tune play. English E-9 E-10 Controlling the Keyboard Sounds Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. 1. Press bn (TONE). 2. Use bq (10-key) to select the tone number you want. The corresponding tone number and tone name will appear on the screen. • Use the number buttons to enter the tone number. Specify three digits for the tone number. Example: To select 001, enter 0 3 0 3 1. • See the separate “Appendix” for a complete list of available tones. • When one of the drum sets is selected (tone numbers 395 through 400), each keyboard key is assigned a different percussion sound. 3. Try playing something on the keyboard. The tone of the instrument you selected will sound. Press bn (TONE) and bo (RHYTHM) at the same time. This selects the grand piano tone. Settings bnbnbqbq3344bobobrbrbsbsbtbtckckclclSelect from a variety of musical instrument sounds To select an instrument for playing St . G r P n o Tone name Tone number Playing with a Piano Tone (Piano Setup) Tone Number: “001” Reverb: “06” Transpose: “00” Touch Response (LK-240 only): Off: Returns to initial default On: No change Pedal Effect: SUS Rhythm Number: “131” Accompaniment: Rhythm part only Local Control: On Drum Assign: Off E-10 Controlling the Keyboard Sounds Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. 1. Press bn (TONE). 2. Use bq (10-key) to select the tone number you want. The corresponding tone number and tone name will appear on the screen. • Use the number buttons to enter the tone number. Specify three digits for the tone number. Example: To select 001, enter 0 3 0 3 1. • See the separate “Appendix” for a complete list of available ton...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - LK-160 (1.73 mb)
Musikinstrumente - LK-240 (1.73 mb)