Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Fotos und technische Daten Casio AP-200 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
NOTE • You can use only the MODERN or CLASSIC tone for a duet. 2. Press the MODERN and CLASSIC GRAND PIANO buttons at the same time. • This will enter the Duet Mode and split the keyboard. The GRAND PIANO lamp will flash momentarily to let you know when the Duet Mode is entered. 3. To exit the Duet Mode, press either the MODERN or CLASSIC GRAND PIANO button. IMPORTANT! • The digital piano also will exit the Duet Mode if you use the TONE/SETTING button and tone setting keyboard keys to select a tone in step 3. • You cannot use the Duet Mode while recording. Playing with Different Tones Changing the Octaves of the Keyboards You can change the ranges of the left and right keyboards in octave units from their initial default settings. This comes in handy, for example, if the initial default range is not enough when one person is playing the left hand part and another person is playing the right hand part. 1. While holding down the MODERN and CLASSIC GRAND PIANO buttons, press the keyboard key of C that you want located at C4 (middle C) of the left keyboard. C4 C5 C6 C7 C3 C4 C5 C6 Left keyboard Right keyboard Example: Press the keyboard key of the leftmost C will assign the range shown below. (Pressed key) 1 octave higher than initial Unchanged setting 2. While holding down the MODERN and CLASSIC GRAND PIANO buttons, press the keyboard key of C that you want located at C4 (middle C) of the right keyboard. NOTE • You can return the keyboards to their initial default ranges by exiting and then re-entering the Duet Mode. E-11 Playing Back Built-in Songs IMPORTANT! • After you select a built-in song, it can take a number of seconds for the song data to be loaded. While the data is being loaded, the keyboard keys and button operations will be disabled. Selecting a song while playing something on the keyboard will cause sound output of the keyboard notes to stop. Your digital piano comes with a Music Library of 60 built-in tunes. You can play all 60 tunes in sequence, from beginning to end. 1. While holding down the TONE/SETTING button, press the SONG ../.. button. • This will start repeat demo playback of the built-in songs in sequence, from 01 through 60. • You can play along with a song on the keyboard as it is playing. The tone assigned to the keyboard is the one that is preset for the song that is playing. • You can select a specific song during demo playback. For details, see step 2 under “Playing Back a Specific Music Library Song”. 2. Press the SONG ../.. button again to stop built-in song play. NOTE • The tune selection and playback stop operations described above are the only operations that are possible during demo tune play. • Built-in tune MIDI data is not output during built-in song play. 1. Find the song number of the song you want to play in the song list on page A-1. 2. To change to another song, hold down the TONE/SETTING button as you use th...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - CELVIANO AP-200 (948.21 kb)