Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
. CN CO in r- 00 Congratulations! You have just joined the large and growing family of satisfied users of Yamaha products. You have chosen wisely when you picked model PM-210 as your mixer. Years of dependable service await you. Please read this OWNER’S MANUAL carefully before connecting your mixer. The few minutes spent with this manual will help you understand its operation and high performance. You will also learn how to connect the mixer properly and how to really get the most out of all the features Yamaha has incorporated into this mixer. If you need any special help or service, see your Yamaha dealer. He knows what to do and will be happy to help you. You’ve made a good choice. We are confident you’ll be satisfied with the performance and versatility of PM-210. FEATURES The PM-210 is a professional 8-channel input, mono output mixer that meets the requirements of fixed or portable sound reinforcement, as well as sophisticated disco, broadcast production and recording applications. Check the features here and study the explanations of the front and rear panels. You’ll see immediately that the PM-210 has the flexibility, performance and reliability you need in your work. Top Electrical Performance This mixer is designed for top professional performance. It offers flat frequency response, low distortion and inaudible noise. Each sound is maintained at its original purity, or is controlled exactly as desired. 8-Channel Inputs The PM-210 has 8-channel inputs with unbalanced phone jacks. Each channel has its own individual FADER, LOW/HIGH-EQ, MONITOR REVERB/ECHO controls and INPUT level switches. Switchable Input Level All eight input channels have 3-position switches to change the input attenuation so the full range of the FADER controls can be used with varying microphone or instrument sensitivities. 2 FADER Controls The smooth sliding FADER controls for Input, Program Master and Monitor Master have a positive feel and give an excellent visual indication of the relative volume of each channel. Wide Choice of Inputs and Outputs This wide choice offers great flexibility for,use with a wide range of equipment. In addition to the 8 low impedance INPUT channels, the PM-210 has AUX IN and FROM ECHO inputs. Outputs include PROGRAM OUT A & B, AUX OUT, MONITOR OUT and TO ECHO. Sturdy, Portable Construction This unit has a hard protective cover which enables it to withstand rough handling on the road. Even with the cover it is lightweight. All solid state circuitry increases portability. PRECAUTIONS & CONNECTIONS Precautions The PM-210 is rugged and durable, but not indestructible. It has been designed to stand up to tough handling but certain precautions must be taken. The most frequent cause of trouble is improper use due to incomplete understanding of exactly what the mixer can and cannot do. You can easily avoid these mistakes by following the precautions listed here before plugging in or attempting to operate your mixer. Be sure the POWER switch is off before plugging in the power cord. Unplug the POWER cord, or at least make sure the POWER switch is off before connecting or disconnecting any cords. If a fuse blows, be sure that the replacement is exactly the same type and rating. Repeated fuse failures indicate a problem with the amplifier or power lines. If you have regular fuse failures, consult your Yamaha dealer. Do not expose the mixer to direct sunlight and other sources of excessive heat, humidity, dust or shock. Connecting Up 1. Before plugging in the power cord, make sure the VOLTAGE SELECTOR on the rear panel is properly set for your locality. (U.S., Canadian and Australian models are preset and thus don’t have this feature.) For the British Standard model, please refer to the instructions on page 6. 2. Set the front panel FADER controls to “zero” and make sure the POWER switch is OFF. 3. Connect your power amp, etc. to the • output jacks. 4. Connect the input cords from your instruments and/or mics to the INPUT, AUX IN, and FROM ECHO jacks. 5. Plug in the power cord. 6. Turn on the POWER switch. Pick the ON position which has the lower hum level. (European and Australian models have only one ON position.) 7. Adjust the FADER and other controls. Now you are ready to mix sound sources as you like. FRONT PANEL O © FRONT PANEL O CHANNEL FADER (INPUT FADER) The straight-line Fader provides continuously variable adjustment of the channel’s output to the PROGRAM and the MONITOR mix buses. © HIGH/LOW-EQUALIZER Two controls alter the frequency response of the channel input, allowing you to achieve a variety of tonal characteristics. The LOW and HIGH controls provide ±12dB of continuously variable shelving equalization at 100Hz and 10KHz respectively. Centering the controls provides flat audio response by defeating the equalization. ©MONITOR REVERB/ECHO VOLUME The rotary control assigns the post-equalizer, postfader signal to the MONITOR mixing bus. Used for mo...