Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Yamaha YSP-1100 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
pp ¦ DIMMER SET (Dimmer settings) 1 Press / to place the _ (underbar) under Use to adjust the brightness of the front panel display. the space or the character you want to edit. The _ (underbar) flashes. STANDARD DIMMER;;;;;OFF AUTO DIMMER ;;;;;;;;;;;;;OFF [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return A)DIMMER SET pp. pp ENTER STANDARD DIMMER (Standard dimmer) Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control. 2 Press / to select the desired character. • You can use up to 8 characters for each input. • Press to change the character in the following Choices: –2, –1, OFF order or press to go in the reverse order: AUTO DIMMER (Auto dimmer) A to Z, a space, 0 to 9, a space, a to z, a space, #, *, If no operation is performed for a specified period, the +, etc. front panel display dims. Use to adjust the brightness of the front panel display in this case. Choices: OFF (the same brightness as the STANDARD DIMMER setting), –1 to –3 (based on the STANDARD DIMMER setting), DISPLAY OFF ENTER 3 Repeat steps 1 to 3 to rename each input. 4 Press ENTER to exit. The new names are registered, and the display returns to the previous screen. ENTER 70 En MANUAL SETUP ¦ OSD SET (OSD settings) Use to adjust the display position and the background color of the OSD. OSD SHIFT;;;;;;;;0 OSD BACK COLOR;;;BLUE [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return B)OSD SET pp. pp OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust towards the – (minus) direction to raise the position of the OSD, and adjust towards the + (plus) direction to lower it. Choices: –5 to +5 Initial setting: 0 OSD BACK COLOR (OSD background color) Use to select the background color of the OSD. Choices: BLUE, GRAY ¦ UNIT SET (Unit settings) Use this to change the display unit of measurement. Choices: METERS, FEET METERS FEET [ ]/[ ]:Select [ENTER]:Return ppC)UNIT SET p • Select METERS to input distances in meters. • Select FEET to input distances in feet. Note If you change this setting, the adjusted beam settings may change. ADVANCED OPERATION English 71 En ADJUSTING THE AUDIO BALANCE ADJUSTING THE AUDIO BALANCE You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use the test tone to set channel levels so that the volume level of each channel is identical when heard from your listening position. CH LEVEL MENU RETURNTEST ENTER OFF 0 +10 YSP TV/AV 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press TEST on the remote control. TEST FRONT L appears in the front panel display and a test tone is output from the front left channel. TEST VOL TEST FRONT L 3 Press / to select the channel you want to adjust. The front panel display changes as follows. ENTER TEST FRONT L TEST CENTER TEST FRONT R TEST SUR.R TEST SUR.L TEST SWFR Note TEST SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 67). 4 Press / to adjust channel volumes. ENTER Control range: –10 dB to +10 dB 72 En ADJUSTING THE AUDIO BALANCE 5 Press TEST when you have completed all Using the audio output being your adjustments. player back You can also manually adjust the channel levels while playing back an input source such as a DVD. TEST Notes • All the channel levels cannot be adjusted when the stereo playback or my beam is selected as the beam mode (see pages 47 and 48). • FRONT L/R cannot be adjusted when the stereo plus 3 beam is selected as the beam mode (see page 43). • FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 43 and 47). y If the level of a particular channel cannot be adjusted, – –dB appears in the front panel display. CH LEVEL MENU RETURNTEST ENTER OFF 0 +10 YSP TV/AV 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press CH LEVEL repeatedly (or press CH LEVEL and then / ) to select the channel you want to adjust. The front panel display changes as follows. CH LEVEL or CH LEVEL ENTER FRONT L +1.0dB CENTER -2.5dB FRONT R +1.0dB SUR.R +2.0dB SUR.L +2.0dB SWFR --dB ADVANCED OPERATION English 73 En ADJUSTING THE AUDIO BALANCE Note SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 66). 3 Press / to adjust channel volumes. ENTER Control range: –10 dB to +10 dB 4 Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All the channel levels cannot be adjusted when the stereo playback is selected as the b...