Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
The following description covers assembly of the DTX500 Drum Trigger Module only. Mounting the drum trigger module 1. Attach the module stand (provided) to the underside of the drum trigger module using the module stand fastening screws. Module stand fastening screws Front of Module Module stand Drum trigger module (back side) 2. Place the module stand inside the holder clamp and tighten the clamp bolt to secure in position. Connect the pads to the drum trigger module Insert the 9-channel snake cable’s straight plugs into the drum trigger module’s trigger input jacks ([OSNARE] to [©KICK/®] and [HI-HAT CONTROL]). note[ If you are using the standard setup, the stickers on each of the snake cable’s plugs will indicate the name of the corresponding pad. Drum trigger module’s rear panel 9-channel snake cable Straight plugs 1 2 3 4 (Gi FQ-g ©©©©II © OSNARE 0TOM1/1O 0TOM2/11 OTOM3/12 R-OUTPUT-L/MONO PHONES AUX IN VOLUME © Straight plug names DTX500 jack names (as shown on stickers) SNARE- -1: OSNARE TOM1- -2: ©TOM1/© TOM2- ■3: ©TOM2/® TOM3- 4: OTOM3/! RIDE- -5: ©RIDE CRASH- -6: ©CRASH HI-HAT- -7: ©HI-HAT KICK- -8: ©KICK/© HH CON- -9: HIHAT CONTROL L-shaped plugs J J, HH CON HI-HAT CRASH ...
Musikinstrumente - DTX560K (661.32 kb)