Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
¦ Removing the Instrument From Its Case 1. Holding the instrument with both hands, gently remove the instrument from its case. Slide Braces Before Playing * Holding only the main section of the instrument can result in damage to the bell, so please hold on to both the bell and the main part of the instrument when removing it from the case. 2. When removing the slide from the case, hold the slide with both hands hooking a finger on the slide brace to keep the slide from moving, and gently lift the slide out of the case. * Always hold the slide with both hands. Holding it with only one hand may result in damage to the slide. * When carrying only the slide, make sure that both of the slide braces are held together to prevent either section of the slide from dropping. ¦ Preparing the Slide 1. Remove dirt from inside of the inner slide then apply a bit of slide cream on the slightly thicker end sections of the slide. Inner slide Apply slide cream to these parts * Do not use slide grease on these parts. 2. After applying slide cream, use a water spray bottle to moisten the slide sufficiently. 21 Before Playing 3. Put the outer slide on the inner slide and slide the two sections back and forth several times to distribute the cream evenly. * The amount of slide cream applied to the slide has an effect on how smooth the slide moves. Experiment with different amounts of cream to determine the optimum amount necessary. * If the slide becomes sluggish while playing, moisten the slide with the water spray bottle. CAUTION! Preventing the Slide From Coming Off The slide consists of outer and inner slide sections. Make sure that the slide lock ring is securely locked to keep the outer slide from accidentally coming off when assembling the instrument, etc. Slide Stopper Slide Lock Ring Outer Slide When Locked ¦ Oiling the Rotary Valve On tenor bass trombones and bass trombones, apply rotor oil directly to the rotary valve through the slide receiver. Bell Receiver * Rotor oil adhering to the inside of the receiver can attract dirt and dust to the rotary valve resulting in poor function. Please use caution. 22 Before Playing ¦ Assembling the Instrument 1. After confirming that the slide lock is locked, hold the slide by the slide brace and rest the bumper on the floor. 2. Use your other hand to hold on to the bell section. * Make sure you hold on to the bell section close to the slide receiver. If you hold on to the tuning slide, the tuning slide may come off or poor stability may result in the instrument being bumped. 3. Attach the slide section to the main bell section. Attach the slide so that it is at a suitable angle when you play. 4. After attaching, tighten the slide receiver to secure the slide in place. Receiver Slide Receiver Slide Stopper * After assembly is complete, make sure that the slide brace is used to hold the instrument. Also, handle the instrument with care, being careful not to bump or damage it. ¦ Attaching the Mouthpiece Insert the mouthpiec...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - YSL-871 (5.58 mb)
Musikinstrumente - YSL-872 (5.58 mb)
Musikinstrumente - YSL-350C (5.58 mb)
Musikinstrumente - YSL-354 (5.58 mb)