Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
RCV HOLD-1+ (Receive Hold 1 Switch) OFF, ON Sets whether the Part responds to received MIDI Hold 1 messages (ON) or not (OFF). PHASE LOCK+ (Phase Lock Switch) OFF, ON This setting activates (ON) or de-activates (OFF) synchronization of the timing of Parts that share a common MIDI channel. * When Part sounds are layered on top of each other as a result of sharing a MIDI channel, there may be a discrepancy in their timing. The Phase Lock feature can synchronize the sounds so that they start precisely at the same time. However, since this delays the sounds slightly in order to line them up, turn this feature off when it’s not needed. VELOCITY CURVE TYPE+ OFF, 1–4 For each Part, you can select from among four velocity curves to find the one that best matches the touch of the MIDI keyboard connected to the XV-2020. Set this to “OFF” if you’re using the MIDI keyboard’s own velocity curve. 1 2 3 4 Creating a Performance PART SCALE TUNE One set of Scale Tune settings can be created in Performance mode. * The selected scale applies to MIDI messages received from an external MIDI device as well as to local sound generation. Parameter Value Description SCALE TUNE SWITCH OFF, ON The XV-2020 allows you to use temperaments other than equal temperament. Turn this on when you wish to use a tuning scale other than equal temperament. KEY C–B SCALE -64–+63 Adjusts the pitch of each note in one-cent steps (1/100th of a semitone) relative to its equal-tempered pitch. PERFORM MFX (Performance Multi-effects) Parameter Value TYPE (Multi-Effects Type) Refer to p. 80. SEND LEVEL DRY (Multi-Effects Dry Send Level) SEND LEVEL CHO (Multi-Effects Chorus Send Level) SEND LEVEL REV (Multi-Effects Reverb Send Level) CONTROL SOURCE 1–4 (Multi-Effects Control Source1–4) DESTINATION 1–4 (Multi-Effects Control Destination 1–4) SENS 1–4 (Multi-Effects Control Sensitivity 1–4) PERFORM CHORUS (Performance Chorus) Parameter Description TYPE (Chorus Type) Refer to p. 80. LEVEL (Chorus Level) OUTPUT SELECT (Chorus Output Assign) SOURCE (Multi-Effects Source) PERFORM REVERB (Performance Reverb) Parameter Description TYPE (Reverb Type) LEVEL Refer to p. 80. (Reverb Level) SOURCE (Multi-Effects Source) Adjusting Effect Settings Refer to Multi-Effects Parameters (p. 82). Saving Performances You Create Creating Refer to Saving a Sound You Create (p. 92). 75 Using the XV-2020 Effects Using the XV-2020 Effects This chapter explains how effects are applied in Patch/Rhythm Set mode or Performance mode. * For information about the application of effects in GM mode, refer to “Making Effects Settings in GM Mode (EFFECTS) (p. 97).” Effect Types The XV-2020 has the following four onboard effect processors, and settings can be made independently for each. MFX (Multi-Effects) The Multi-effects are multi-purpose effects that completely change the sound type by changing the sound itself. Contained are 40 different effects types; select and use the type that suits your aims. In addition to effects...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - XV-2020 (2.52 mb)