Anleitung Roland, modell VS4S-1
Hersteller: Roland
Dateigröße: 547.78 kb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Anleitung Zusammenfassung
Please read it carefully before using an external Zip drive. To assure proper handling of the unit, please carefully read the information contained in the sections entitled "IMPORTANT SAFETY INSTRUCTIONS" (Owner's manual page 2), "USING THE UNIT SAFELY" (Owner's manual page 3) and "IMPORTANT NOTES" (Owner's manual page 10) in the VS-840/VS-840S Owner's Manual before you begin using this unit. * It is not possible to use an external Zip drive to record. * In the VS4S-1 OWNER’S MANUAL, the "VS-840" and the "VS-840S” are collectively referred to as the "VS-840.” * Iomega is a registered trademark of Iomega Corporation. * Zip is a trademark of Iomega Corporation. Copyright © 1997 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. "SCSI" stands for "Small Computer System Interface." This is a data transmission method that can transmit large amounts of data. A Zip drive can be connected to the SCSI connector of the VS-840. Connecting all external Zip drive Up to 2 Zip drives can be connected to the SCSI connector of the VS-840. This section will explain how to make the external Zip drive connections, and how to make the necessary settings. Whenever you connect an external Zip drive, be sure to check the following points. Connectors and cables SCSI cables are used to connect the external Zip drive as shown below. Since there is no difference between a SCSI input and output, it does not matter which connector you use. This type of connections is referred to as a "SCSI chain" or a "daisy chain." VS-840 Zip drive 0 Zip drive 1 To connect a Zip drive, use the SCSI cable included with the ZIP-EXT-2S Zip drive (sold separately). When making connections, observe the following points. • The SCSI connector of the VS-840 is a 25 pin D-sub type connector. • Keep SCSI cables as short a...
)