Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1, 2001 Version: 1.00 1. Receive data * The VK-8 has two MIDI IN connectors: KEYBOARD IN and PEDAL IN. If the SUB KEYBOARD FUNCTION (p. 58) is ON, messages input to KEYBOARD IN will be received as messages for the Lower part, regardless of their channel number. Messages input to PEDAL IN will be received as messages for the Pedal part, regardless of their channel number (Omni On). * When the SUB KEYBOARD FUNCTION (p. 58) is OFF, MIDI messages will control each part according to their MIDI channel number (Omni Off). At the factory settings, each part is set to the following transmit/receive channels. CONTROL 1ch UPPER ORGAN 1ch LOWER ORGAN 3ch PEDAL ORGAN 2ch OTHER TONES 4ch DRUMS 10ch SPRING SHOCK 9ch ■Channel Voice Messages •Note off Status 2nd byte 3rd byte vvH 00H 0H - FH (ch.1 - ch.16) 00H - 7FH (0 - 127) 00H - 7FH (0 - 127) When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART. 8nH kkH 9nH kkH n = MIDI channel number : kk = note number : vv = note off velocity : •Note on Status 2nd byte 9nH kkH n = MIDI channel number: kk = note number : vv = note on velocity : ЗМ byte vvH GH - FH (ch.l - ch.16) GGH - /FH (G - 12/) GGH - /FH (G - 12/) * When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART. •Control Change QModulation (Controller number 1) Status 2nd byte 3rd byte BnH 01H vvH n = MIDI channel number : 0H - FH (ch.1 - ch.16) vv = modulation depth : 00H - 7FH (0 - 127) * Received only for the Other Tones Part. QData Entry (Controller Number 6, 38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number : 0H - FH (ch.1 - ch.16) mm,ll = the value of the parameter specified by RPN/NRPN mm = upper byte (MSB), ll = lower byte (LSB) QVolume (Controller number 7) Status 2nd byte BnH 07H n = MIDI channel number : vv = volume : * Received only for the Other Tones Part. ЗМ byte vvH GH - FH (ch.l - ch.16) GGH - /FH (G - 12/) QPanpot (Controller number 10) Status 2nd byte 3rd byte BnH 0AH vvH n = MIDI channel number: 0H-FH (ch.1-ch.16) vv = panpot: 00H-40H-7FH (Left-Center-Right) * Received only for the Other Tones Part. QExpression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number : 0H - FH (ch.1 - ch.16) vv = expression : 00H - 7FH (0 - 127) * If you want to control all of the Organ Parts, transmit data on the channel specified by the CONTROL MIDI CH. setting (factory setting: channel 1). It is not possible to separately control each part of the Organ Part. * When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has the same function as an expression pedal connected to the VK-8’s EXPRESSION PEDAL jack. QGeneral Purpose Controller 1 (Controller number 16) (Other tones glide) Status 2nd byte 3rd byte BnH 10H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * Received only for the Other Tones Part. * Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF. QGeneral Purpose Controller 2 (Controller number 17) (Wheel Brake) Status 2nd byte 3rd byte BnH 11H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * When SUB KEYBOARD FUNCTION (p. 58) is OFF, this is received on the channel specified for CONTROL MIDI CH. (p. 54) (factory setting: channel 1). * Not received by the Other Tones part. * Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF. QHold 1 (Controller number 64) Status 2nd byte 3rd byte BnH 40H vvH n = MIDI channel number : 0H - FH (ch.1 - ch.16) vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has same function as a hold pedal connected to the VK-8’s HOLD PEDAL jack. QSound Controller 1-9 (Controller number 70-78) (Harmonic Bars) ЗМ byte vvH GH - FH (ch.l - ch.16) 46H - 4EH (/G-/S) GGH - /FH (G - 12/) Status 2nd byte BnH ccH n = MIDI channel number : cc = control change number : vv = control value : * Receives harmonic bar values. * Not received by the Other Tones part. * When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART. * Not received when MIDI SOUND CONTROLLERS SWITCH (p. 53) is OFF. cc H.Bar Feet 4 6H 16, 4 7H 5 1/3, 4 8H 8, 4 9H 4, 4AH 2 1/3, 4BH 2, 4CH 1 3/5, 4DH 1 1/3, 4EH 1, Control values and harmonic bars vv H.Bar Level 00H - 0EH 0 0FH - 1CH 1 1DH - 2AH 2 2BH - 3 8H 3 3 9H - 4 7H 4 4 8H - 55H 5 5 6H - 63H 6 64H - 71H 7 72H - 7FH 8 QRPN MSB/LSB (Controller number 100, 101) Status 2nd byte 3rd byt...