Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
The settings in these preset memories will be overwritten when settings are modified and then saved. • Temporary area When you select an Organ Preset or User Preset, the settings are loaded into this temporary area. There are two types of temporary area: "User Preset-related temporary area" and "Organ Preset-related temporary area." The area into which the data is loaded will depend on the type of settings that were selected. • User Preset-related temporary area When you select a User Preset, the Edit mode USER COMMON settings, and the panel settings for ORCHESTRAL ASSIGN, SPLIT, ORGAN MUTE, and"ORCHESTRAL LEVEL will be loaded into this temporary area. When you perform the Save operation into a User Preset, these categories of data will be saved in the specified preset memory. 40 How the VK-7 is Organized • Organ Preset-related temporary area When you select an Organ Preset or User Preset, the edit mode ORGAN BASIC and ORGAN EFFECTS settings, and the panel settings for the PERCUSSION buttons and the OVERDRIVE knobs etc. will be loaded into this temporary area. Selecting a User Preset will also cause data to be loaded into this area, but the data that is loaded will be the organ data from the User Preset memory, and not the data from the Organ Preset memory. About the Effects_ The following effects are built into the VK-7. ■ Vibrato Vibrato adds modulation to the sound by cyclically raising and lowering the pitch of the sound. Vibrato will be applied if you assign vibrato to [VIBRATO/CHORUS] (p.50), and turn [VIBRATO/CHORUS] on. In Edit mode you can select from three different depths of vibrato. Vibrato can be applied to the Organ Preset alone, and cannot be applied simultaneously with chorus. ■ Chorus Chorus adds a pitch-shifted sound to the original sound in order to add depth and spaciousness to the sound. It can be applied to Organ Presets and to Orchestral Voices. Also, chorus is applied independently to Organ Presets and Orchestral Voices. • For an Organ Preset Chorus will be applied when you assign Chorus to [VIBRATO/CHORUS] (p.50) and turn on [VIBRATO/CHORUS]. Chorus depth can be selected in three levels. Chorus cannot be applied simultaneously with vibrato. • For an Orchestral Voice Chorus will be applied when you raise the chorus send level (p.62). ■ Ring Modulator The ring modulator uses the signal from an internal oscillator to produce ring modulation with the sound of the organ, producing bell-like sounds. This allows you to create characteristic sounds that have no sense of pitch. ■ Overdrive Overdrive causes the sound to distort in a way similar to when a vacuum tube amp is used. This can be applied only to Organ Presets. You can adjust the depth of overdrive with OVERDRIVE knob. You can also specify the tone of the low range, mid range and high range (p.51) to modify the way in the sound will distort. ■ Rotary Rotary adds modulation to the sound as when a rotary speaker is used. It can be applied only to Organ Presets. To apply a rotary effect, raise the volume of the rotary speaker (p.53), and turn off [BYPASS] and [BRAKE]. ■ Reverb Reverb adds the reverberation that is characteristic of a large acoustic space. It can be applied to Organ Presets, User Presets, and Orchestral Voices. Reverb can be applied by raising the corresponding send level for each (p.65). Rotate the REVERB knob to adjust the reverb return level. For User Presets, you can specify the type of reverb (p.66). For Organ Presets and Orchestral Voice, the reverb that was selected for the last-selected User Preset will be used. 41 How the VK-7 is Organized About return levels and send levels The audio signal is split into two before effects are applied. Then, the effect is applied to one branch and the two branches are re-combined. Effect (chorus, reverb, etc.) O Send Level Audio Signal [ Audio signal is split Audio signal not processed by the effect h 0 Return Level 1_„ Audio signals processed and not processed by the effect are combined In this case, the level of the audio signal that is sent to the effect is referred to as the send level, and the level of the effect-processed audio signal that is mixed in is referred to as the return level. About the VK-7's Modes_ The functionality of the VK-7 is organized into various blocks, referred to as "modes." To select, modify or save a sound, you will select the mode that contains the desired functionality. ■ Organ Preset mode In this mode you can select and play a single Organ Preset. ■ User Preset mode hi this mode you can select and play a single User Preset. Select this mode when you wish to play an Organ Preset and an Orchestral Voice as a layer, or to assign an Organ Preset and User Preset etc. to different areas of the keyboard (split). ■ Edit mode Edit mode is where you can modify (edit) sounds and other settings (p.45). In Edit mode you can make the following settings. • USER COMMON, ORGAN BASIC, ORGAN EFFECTS, ORCHESTRAL...