Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
When moving the KD-8, be sure to remove the screws and fold the stand. Transporting the KD-8 while it remains open may subject the stand to excessive strain and result in damage to the stand. Anti-skid tape is affi xed to the foot plate. When transporting the KD-8, don’t forget to pick up the foot plate. * * * * Loosen the stand’s anchor bolts and re- * move the foot plate. Set the kick pedal so that the entire bottom surface is attached to the fl oor. 1. 2. In most cases, the stand becomes somewhat elevated. Tighten the anchor bolts securely there to fi x the stand and foot plate. 3. Remove the screws attached to the reverse side of the KD-8’s trigger. Pull out the stand in the direction indicated by the arrow until it is fully extended. Using any commercially available drum key, tighten the screws removed in Step 1 so that the stand is fi rmly secured. 1. 2. 3. Making the settings Attach the kick pedal Adjusting the foot plate height NOTE To learn about the TD-9’s wide range of unique functionality, refer to “Quick Start.” If you need further information regarding the set up of TD-9K, refer to the section “If you don’t hear any sound” (p.18) in the Owner’s Manual. ¦ ¦ The parts required for mounting the cymbals and the hi-hat are included in the TD-9K attachment box. * Head replacement procedure Detailed explanation of each part FD-8 (Hi-hat control pedal) FD-8 component names Anchor bolt Pedal plate Control out jack Arm NOTE The tips of the anchor bolts are sharp. Handle with care. When using on hard-surfaced fl ooring, the anchor bolts may damage the fl oor. Do not attach the anchor bolts. To adjust the travel of the pedal, loosen the arm bolt. * * * CY-8 (Crash / Ride cymbal) CY-8 component names CY-5 (Hi-hat) NOTE function. * CY-5 component names PDX-8 (Snare) PDX-8 component names NOTE Be sure to adjust the head tension of the PDX-8 before use. Striking the head when the head tension is loose may damage the sensor and head. Do not apply excessive force to the sensor and cushion located under the head. Doing so can interfere with accurate detection, and may damage it. Due to the nature of the materials used in the sensor of the PDX-8, changes in room temperature may aff ect the sensitivity of the sensor. The rim rubber is one component that eventually wears out (depending on the number and strength of the rim shots performed), and will require replacement. Rim shots may not be performed correctly when the rim rubber is worn out. If this occurs, replace the rim rubber. Consult Roland Service for more on replacing the rim rubber. * * * * * Remove all tuning bolts and washers. Do not apply excessive force to the sensor and cushion located under the head. Doing so can interfere with accurate detection, and may damage it. Remove the hoop. Remove the old head. Place the new head on the shell. Place the hoop on the head. Attach the tuning bolts to the hoop and shell. Adjust the head tension. For details, refer to the explanation on the opposite side of this leafl et. 1. * 2. 3. 4. 5. 6. 7. Loosen Tighten Drum key Hoop Rim rubber Shell Tuning bolts Head sensor Rim sensor Head Rim rubber Tuning bolts Head sensor Rim sensor Wing nut Head Holder Output jack Shell Hoop PD-8 (Tom) PD-8 component names Wing bolt Head Pad face Rim Output jack Stand fixing screw ¦ Replacement head (sold separately) : MH-8 mesh head Player Suitable position for rim shots For EU Countries For China As of Oct. 1, 2007 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. EGYPT Al Fanny Trading Office 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-418-5531 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 SOUTH AFRICA T.O.M.S. Sound & Music (Pty)Ltd. 2 ASTRON ROAD DENVER JOHANNESBURG ZA 2195, SOUTH AFRICA TEL: (011)417 3400 Paul Bothner(PTY)Ltd. Royal Cape Park, Unit 24 Londonderry Road, Ottery 7800 Cape Town, SOUTH AFRICA TEL: (021) 799 4900 CHINA Roland Shanghai Electronics Co.,Ltd. 5F. No.1500 Pingliang Road Shanghai 200090, CHINA TEL: (021) 5580-0800 Roland Shanghai Electronics Co.,Ltd. (BEIJING OFFICE) 10F. No.18 3 Section Anhuaxili Chaoyang District Beijing 100011 CHINA TEL: (010) 6426-5050 HONG KONG Tom Lee Music Co., Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T.S.T, Kowloon, HONG KONG TEL: 2333 1863 INDIA Rivera Digitec (India) Pvt. Ltd. 411, Nirman Kendra Mahalaxmi Flats Compound Off. Dr. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 INDONESIA PT Citra IntiRama Jl. Cideng Timur No. 15J-15O Jakarta Pusat INDONESIA TEL: (021) 6324170 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 MALAYSIA Roland Asia Pacific Sdn. Bhd. 45-1, Block C2, ...