Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The SD-90 relies on an identical device ID number when transmitting and receiving exclusive messages. This means that in order to use exclusive messages to transfer data, both devices must be set to the same device ID number. The device ID number is a number from 1 to 32. The factory setting is 17. SysEx. DevID 17-32 Specifies the device ID number used when the sound generator mode is Native mode. * When playing SMF music files produced by Roland/Edirol, you must set the device ID number to 17. Playback will not be correct if this is not set to 17. * It is not possible to specify a different device ID number for each Part. * The setting will take effect the next time you turn on the power. Transmitting button/knob operations to an external MIDI device CONTROL OUTPUT On, Off Specify whether operations of the SD-90's own buttons and knobs will be transmitted to an external MIDI device. SHIM*! ШШШ Control Output MIDI IMi THRU Of f MIDI 3 M2 THRU Off Save? Push ENTER ÜOUfcFUti IN..LI IN £ 1 ■SYSTEM ■ MIEl Startup USE INST startup SM£ 5У5ЕК.DEMID m Заме? Push ENTER HMIEIStllNSTStl I ■system ■■ MIDI Startup USE INST startup 1 ЫМ2И S'JSEX. D6MID 17 5 -âu © ? Pu ski EMTER HMIDIStiINSTSt ■De','IH 1 72 System-related settings Specifying the function of the MIDI connectors MIDI IN1 THRU On, Off MIDI IN2 THRU On, Off These are on/off switches for the MIDI THRU function from the MIDI IN connector to the MIDI OUT connector. Ü5VSTEM ■ Corit ro 1 Output Off NIDI IHi THRU ШШ MIDI IN2 THRU Off Заме? Push ENTER HöbitPutB IN 1 I JJL.2 1 Turning this On when operating in USB mode mode will cause the MIDI messages input to the MIDI IN 1 connector to be "thru'ed" to the MIDI OUT 1 connector, and the MIDI messages input to the MIDI IN 2 connector to be thru'ed to the MIDI OUT 2 connector. The MIDI messages that normally would be output from your computer to the MIDI OUT connectors (1 and 2) will no longer be output (i.e., they will not be merged). On the other hand, turning this On when operating in MIDI mode will cause the MIDI messages input at the MIDI IN 1 connector to be thru'ed to the MIDI OUT 1 connector, as well as being sent to PART A; and the MIDI messages input at the MIDI IN 2 connector to be thru'ed to the MIDI OUT 2 connector, as well as being sent to PART B. USB mode THRU function : ON MIDI mode THRU function : ON H *\ 73 System-related settings Preview settings By pressing [PREVIEW] you can audition the currently selected sound. This is called the preview function. Here you can make settings for the preview function ("Auditioning the sounds (Preview)" (p. 15)). Preview Mode Phrase, Single Switches the mode of the Preview function. Select Phrase to use phrase preview, or Single to select single-note preview. Preview Note C-1-C4-G9 Specifies the pitch (key) of the note that will be sounded for single-note preview. Preview Velo 0-127 Specifies the volume (velocity) of previews. Switching the driver ■SYSTEM HW Preview Mode 1 Preview Note C 4 Preview ueio 127 3-aue? Push ENTER Note ■ Uel O | USB Driver Vender, Generic Selects the type of driver that will be used when the SD-90 is connected to your computer. SYSTEM USE Dr i uer KBSEBS sample Rate 44.1kHz Save* Push ENTER Briue-r SaifiPi e Vender: The dedicated driver included on the CD-ROM will be used, allowing audio to be recorded and played with high quality and stable timing. You should select Vender when using 24-bit capable applications such as the Cakewalk series and Cool Edit, or when using ASIO-compatible applications that are able to record/play/edit high-quality audio, such as Cubase VST, Logic Audio, and SingerSongWriter. Generic: The standard USB audio driver included with Windows will be used. Audio signals can be transferred between the SD-90 and computer with a resolution of 16 bits and a sampling frequency of 44.1/48 kHz. Select Generic when you are using applications that use functionality provided by the operating system, such as applications that play back CD audio using the CD-ROM drive of your computer, or that use the software synthesizer included with the operating system. The driver included with the operating system is not compatible with ASIO. The setting will take effect the next time you turn on the power. 74 j System-related settings Specifying the audio input/output jacks The SD-90 has various analog/digital input/output jacks. For each of the input/output jacks, you can specify the audio signals that will be assigned. Sample Rates 44.1kHz, 48kHz Selects the sampling frequency for digital input/ output ("Selecting the digital input jack and sampling frequency" (p. 50)). * The setting will take effect the next time you turn on the power. SYSTEM USE Dr i uen Mender sample Rate EEWtliP Saue» Push ENTER mmwasa mmI Analog In Mic/Guitar, LINE IN Selects whether the MIC/GUITAR jack or the LINE IN jacks will be used as the input jack(s) for analog signa...