Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
SCC-700B Roland Effects Board Instructions ■ Names Case Cover If you have bought the SCC-700B (Roland Effects Board) and the SCC-700C as a set, please skip P.2 of this operation manual. DC Plug Fixing Plug (IN) 1 ■ How to fix • Cord Cover (This can be removed.) * Make sure that you have correctly, made all the connections. 2 ■ How to mount the Effect Unit • First of all, read "9V DC OUT jacks” on P.5 in the SCC-700C owner's manual. (T) Unscrew the Fixing Plug and remove the Rubber Cap of the DC Plug. (2) Connect the plugs to the units and fasten the Fixing Plugs with the screws. © Connect to the 9V DC IN jack of the effect unit. Connect to the output jack of the effect unit. Connect to the input jack of the effect unit. *Make sure that you have not mixed up the input and output jacks. ■ How to open the Units Boards If you wish to open the Units Board for the replacement of the Unit Fixing Cord or DC cord, do as shown below. Unscrew those 12 screws. The Unit Board is situated here. Specifications • Dimensions: 210(H) x 820(W) x 440(D) mm/ 8% x 32% x 17% inches • Weight: 10.8 kg/23 lb 13oz (excluding the SCC-700C & the SCC-700F) • Accessories: LI Cords DC-DC Cord x 4 Screws x 4 (If you buy the SCC-700C and the SCC-700B as a set, they are already fixed, therefore no screw is provided.) Ö The SCC-700C is to be fixed h...