Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
3 Attach the CD drive using the holes on the bottom of the RK-300, as shown in the illustration. 4 Use a USB cable to connect the CD drive’s USB connector to the EXT DRIVE connector on the RK- 300’s rear panel. g.CDD-USB.eps USB cable To EXT DRIVE connector 5 Connect the AC adaptor included with the CD drive to the CD drive’s DC IN jack, and plug the AC adaptor into an AC outlet. g.CDD-PSB.eps Cord hook AC adaptor To AC outlet Power cord Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards. The indicator will light when you plug the AC adaptor into an AC outlet. Screws (3 x 8 mm) Screws (4 x 16 mm) When using the KSC-48 dedicated stand (sold separately) Setup 1 Assemble the stand as described in the assembly instructions included with the stand, and place the RK-300 on the stand. 2 Connect the supplied power cord to the AC IN jack on the RK-300’s rear panel, and connect the other end to an AC outlet. g.PowerCord_e.eps Power cord AC Outlet AC IN 3 Connect the cord of the included pedal (DP-10) to the CONTROL PEDAL jack on the RK-300’s rear panel. Attaching a CD Drive 1 Set the CD drive’s select switch to “AUTO.” g.CDDPowerSW.eps 2 Using the CD drive attachment screws, attach the CD drive to the CD tray. 3 As shown in the illustration, loosen the two screws fastening the CD tray on the back of the RK-300. g.CDtrayScrew-2.eps 4 Place the CD tray between the screws and the RK-300, and turn the two screws to securely fasten the CD tray. g.CDtraySet-2.eps 5 Use a USB cable to connect the CD drive’s USB connector to the EXT DRIVE connector on the RK- 300’s rear panel. g.CDD-EXTDRIVE_e.eps USB cable To EXT DRIVE connector 6 Connect the AC adaptor included with the CD drive to the CD drive’s DC IN jack, and plug the AC adaptor into an AC outlet. g.CDD-PSB.eps Cord hook AC adaptor To AC outlet Power cord Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards. The indicator will light when you plug the AC adaptor into an AC outlet. Set the pedal select switch to “Continuous.” Spacer When using the KS-G8 stand (sold separately) Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS”, “USING THE UNIT SAFELY,” and “Important Notes” in RK-300 owner’s manual. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2008 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any formwithout the written permission of ROLAND CORPORATION. * 5 1 0 0 0 0 3 3 4 5 - 0 1 * 5100003345 Formatting the User Memory When you’ve nished connecting USB memory to the USER MEMORY connector, you’ll need to format the USB memory so that it can be used as “user memory.” 1 Access the main screen. If you’re not at the main screen, press the [EXIT] button a number of times until the main screen appears. g.d-MainScreen.eps 2 Touch