Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
No part of this manual may be translated into any language, stored in a retrieval system, reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Rodgers Instruments LLC. RODGERS INSTRUMENTS LLC 1300 NE 25th Avenue Hillsboro, OR 97124 Telephone: (503) 648-4181 Copyright © 1999 RODGERS INSTRUMENTS LLC All rights reserved. Printed in the United States ot America. Safety Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS WARNING When using this instrument, always follow basic precautions, including the following: 1) Read all the instructions before using, adjusting, or repairing this instrument. 2) To reduce the risk of injury, supervise children closely when children are around the instrument. 3) Use this instrument only in the manner recommended by Rodgers Instrument Corporation. 4) Do not use this instrument near water, for example, near a swimming pool, a damp or wet room. 5) Use of this instrument, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. 10) Unplug the AC adaptor of the instrument from the power source when left unused for a long period of time. 11) Do not walk on, or place objects on top of the power cord. 12) Do not pull the power cord, rather hold the AC adaptor when unplugging the power cord from the power source. 13) When setting up with other Instruments or peripherals, follow the procedures in accordance with Rodgers' instruction manual. 14) Take care so that objects do not fall onto or liquids spill into the instrument. 15) Service the instrument with qualified service personnel when: a. The power cord or AC adaptor has been damaged. 6) Locate the instrument so its position does not interfere with its proper ventilation. 7) Locate the instrument away from heat sources such as radiators, heat registers, or other products that radiate heat directly onto the instrument. 8) Protect the instrument from dust as much as possible. 9) Connect the instrument to a power source only of the type described in the operating instructions or marked on the Instrument's AC adaptor. If you are unable to insert the power adaptor into an outlet, contact an electrician to replace the outlet. b. Objects have fallen onto or liquids have spilled into the instrument. c. The instrument has been exposed to rain or other weather damage. d. The instrument does not appear to operate normally, or exhibits a marked change in performance. e. The instrument has been dropped or the enclosure damaged. 16) Do not attempt to service the instrument yourself. Refer all servicing to qualified technical service personnel. SAVE THESE INSTRUCTIONS i FCC Notice Radio and Television Interference The Rodgers PR-300S Digital Sequencer and Sound Module uses and generates small amounts of radio-frequency (RF) energy. The instrument complies with the limits set for Class A and Class B computing devices. FCC Rules, Subpart J, Part 15 define the limits for radio and television interference in a residential installation. Follow the installation and the use instructions in this manual, or the PR-300S could potentially cause interference with some radio or television reception. In the unlikely event that this occurs, we encourage the user to try the following corrective measures. • Turn the PR-300S OFF to see if it is the actual source of the interference. • Disconnect the keyboard instrument and the PR-300S's input/output cables one at a time. If the interference stops, it is caused by the keyboard instrument or its I/O cable. • Try coiling and uncoiling the PR-300S's power cord in different ways. • Connect the instrument's power adaptor to a power outlet on a different circuit. • Move the PR-300S farther away from the radio or television receiver. • Connect the radio or television receiver to a different power circuit. • Reorient or move the receiver antenna farther away from the PR-300S. Consider installing a rooftop antenna with coaxial cable lead-in between the antenna and receiver. • Consult the nearest Rodgers dealer for more information if the above corrective measures don't remove the interference. Table of Contents Cautions and Notice to Users inside front cover Additional Precautions inside back cover Safety Instructions i FCC Notice ii, inside back cover Top and Front Panel 2 Rear Panel 2 Control Functions 3 Basic Precautions 4 Introduction 5 About this Manual 5 PR-300S Features 5 Getting Started Making the Connections 6 PR-300S with PDI™ Organs 6 PR-300S w/other Rodgers Organs & Keyboa...