Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Dematte & Co. Neu - Rum Siemens - Strasse A A-6021 Innsbruck Box 591 AUSTRIA 0 43 (05222) 63 4510 GREECE A. Andreadis/V. Dimitriadis & Co. Ltd. 2 Fidiou Str. 106 78 Athens GREECE © 3620130 PORTUGAL Casa Caius Instrumentos Musicals Lda. Rua de Santa .Catarina 131 Porto PORTUGAL © 2 - 38 44 56 HUNGARY Intermusica Ltd. Warehouse Area 'DEPO’ Budapest. P.O. Box 3, 2045 Torokbalimt Budapest HUNGARY S 1868905 SPECIFICATIONS KEYBOARD: 49 key velocity sensitive Data Entry: Volume/Pan Pot/Velocity Octave: Standard/Up/Down MIDI Select: MIDI Channels (1-16) Program Change Numbers (1-128) Pitch Bender/Modulation Lever Rear panel terminal: — Power on/off switch — AC Adaptor socket — MIDI OUT Socket DIMENSIONS: 816,5x175x80 mm. WEIGHT: Kg 2,5 Optional: BOSS AC Adaptor ACA 220 (9V/300 mA) for 220 V connection BOSS AC Adaptor ACA 240 (9V/100 mA) for 240 V connection BOSS AC Adaptor ACA 120 (9V/200 mA) for 117 V connection BOSS AC Adaptor ACA 100 (9V/150 mA) for 100 V connection 5 FEATURES ■ The PC-200 is a 49-note, polyphonic MIDI KEYBOARD CONTROLLER with dynamic keyboard. ■ One MIDI OUT Socket is provided for connecting other MIDI devices. ■ Being the PC-200 a MIDI keyboard controller, it is not provided with an internal sound source system, but it can be connected to other MIDI devices such as sequencers, synthesizers, expanders, computers. Thank you for purchasing the ROLAND PC-200 The PC-200 is an easy-to-operate keyboard that anyone can play. This Owner’s Manual is written to help you have many years of musical enjoyment with your PC-200. PANEL DESCRIPTION [1] MULTIFUNCTION MASTER CONTROL [2] MIDI PARAMETER SELECTION & KEYBOARD SENSITIVITY ADJUSTMENT button [3] OCTAVE SELECTION buttons [4] Power on LED [5] MIDI CHANNEL SELECTION [6] PROGRAM CHANGE SELECTION [7] VOLUME, PAN POT & VELOCITY SELECTION [8] PITCH BENDER/MODULATION LEVER [9] POWER SWITCH [10] SOCKET FOR AC ADAPTOR (OPTIONAL) [11] MIDI OUT SOCKET ACCESSORIES SUPPLIED Supplied with your PC-200 are 6 alkaline batteries type MN 1500. These will be found into the package (Batteries life expectance = approximately 30 Hours). — Overturn the instrument. — Open the plastic cover and take out the battery holder, located in the lower part of the instrument. — Insert batteries in the appropriate holder. — Place the holder into the appropriate location and close the plastic cover. € IMPORTANT NOTES * If you wish to use the instrument with external AC Adaptor, use only type Boss ACA (optional) and follow these precautions: * The appropriate power supply for the instrument (100,120,220 or 240 V) is shown on the AC ADAPTOR name plate. Please make sure that the line voltage in your country meets the requirements. * Please do not use the same socket used for any noise generating device (such as a motor, variable lighting system). * It is normal for this unit to become hot while being operated. * If the unit is not to be used for a long period of time, unplug the external AC Adaptor from the AC line. * Disconnected the AC Adaptor immediately in the event of an electrical storm. * Before setting up this keyboard with other MIDI devices, turn this keyboard off along with all other units. * Be sure to connect the MIDI cable securely. If the MIDI cable is disconnected while the instrument is being played, various troubles will occur (e.g. the note may continue to sound). * Static electricity may cause the built-in computer to malfunction. Should this occur, simply reset the instrument by turning the power switch off and then after a few seconds, back on. * This instrument might not operate correctly if turned on immediately after being turned off. If this happens, simply turn it off and after a few seconds later, turn it on again. * Operating the PC-200 near a neon light, fluorescent lamp, TV or CRT display, may cause noise interference. If so, change the position of the instrument. * To avoid risk of electric shock, do not perform any servicing. Refer all servicing to qualified service personnel. THE CARE OF YOUR PC-200 To ensure the best use and full enjoyment of your PC-200, please read this guide carefully and thoroughly. ROOM LOCATION Avoid using this instrument in excessive heat or humidity conditions or where it may be affected by direct sunlight or dust and avoid places subject to high vibrations. CABINET CARE Use a soft dry cloth for dusting. To remove fingerprints or dulling film, use a soft cloth slightly dampened with water and a little mild detergent. Immediately wipe dry with a soft cloth. Do not use solvents such as paint thinners. OPERATION After having inserted the six batteries into the appropriate holder, press the power On/Off switch [9] to operate the PC-200. To use the PC-200 with the AC Adaptor (optional), connect the AC Adaptor to the 9 Volts DC IN socket [10], located on the rear panel of the instrument. Make sure that the line voltage in your country meets the requirements. ...