Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Loosen the lever, adjust the angle of the R-09, then lock the lever again. Attaching the Cover Attaching the Tripod Fasten snap Lash strap to metal ring Spread out the tripod legs to their fullest. Completely extend the tripod legs. Attach the tripod to the threaded hole in the rear of the cover. Grasp the R-09 with your fingers when pressing the R-09’ s buttons. Tighten the screw. Insert the R-09. Fasten the snaps to close the flap. When Attaching to a Belt When Attaching to a Carrying Strap Attaching the Mic Stand Adapter (Optional OP-R09M) Tighten all of the Attach the adapter Rotate the (optional) Loosen the screw as OP-R09M (optional) to the threaded hole mic stand until it is shown, adjust the angle sections to align in the rear of the cover. completely tightened. of the R-09, then tighten the entire unit. Copyright ©2006 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any the screw again. * Use the adapter as required to match the diameter of the mic stand’s screw. OP-R09C form without the written permission of ROLAND CORPORATION. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets. Used for instructions intended the user to the risk of death or severe injury should the unit be used improperly. The . symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet. The symbol alerts the user to important or warnings.The specific meaning determined by the design contained triangle. In the case of the symbol at left, general cautions, warnings, or alerts to The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ......................................................................................................... . • Do not open or perform any internal modifications on the unit. ......................................................................................................... . • Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor. ......................................................................................................... . • In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. ......................................................................................................... . • Protect the product from strong impact. (Do not drop it!) • Try to prevent cords and cables from becoming entangled. In addition, to prevent the equipment from toppling and falling, arrange cords and cables so they do not become pulled or snagged. Also, all cords and cables should be placed so they are out of the reach of children. ......................................................................................................... . • Keep the adapter screw included with the optional special mic stand adapter in a safe place out of children’s reach to prevent accidental ingestion. ......................................................................................................... . IMPORTANT NOTES • Be sure the tripod is spread out adequately. This allows the tripod to stand with greater stability. • Use the setup in a flat, level location. • Use the setup only after confirming the stability of all attached devices. Avoid use in locations where wind or other conditions may cause the equipment to topple and fall. • Always detach the device from the tripod before moving it. Carrying the device while it is still attached to the tripod may cause the device to separate from the tripod and fall. • Do not leave the device attached to the tripod. The topple and fall, resulting in unanticipated damage to the unit. • Take care not to allow fingers to become pinched when extending and retracting the tripod legs. * Roland assumes no liability whatsoever for any damages, loss of income, or claims by any third party a...