Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
• When connecting the instrument to a guitar amp, make the necessary adjustments to get the most suitable tone. When recording direct, use this with a COSM amp (GT-3, GP-20 etc.). • When connecting a GK cable, insert the cable completely until the connector is securely locked. When disconnecting, press the connector’s lock while you detach the cable. * Always turn the amp volume down completely before connecting and disconnecting cords. * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line voltage be interrupted (power blackout or power cord disconnection). Turning On the Power Be sure to observe the following order when connecting devices and switching on the power to your equipment. By turning on devices in the wrong order, you risk causing malfunction and/ or damage to speakers and other devices. Connect the GK-2A . (Connect the AC Adaptor) . Connect the Amp . Turn On Amp Power * When the unit is running on battery power, the power comes on when you insert the connector plug into the OUTPUT jack. * Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. * When operating on battery power only, the unit’s indicator will become dim when battery power gets too low. Replace the battery as soon as possible. 5 Operating Instructions Using the Pedals fig.04 “MASTER: ON” and “DISTORTION: OFF” are selected when the power is turned on. Master is toggled on and off by stepping on the MASTER On/Off pedal. When switched on, the GK effect sound is output. When off, the output from the divided pickup is muted, and the sounds from the normal pickup (or the sounds input to GUITAR RETURN) are output without change. Distortion is toggled on and off by stepping on the Distortion On/Off pedal. When Master is off, you can switch the distortion on and off in order to prepare the settings. Distortion is not applied to the output from the normal pickup. Illuminated Extinguished . When at “ON” When at “OFF” Illuminated Extinguished . . . When at “ON” When at “OFF” 6 Operating Instructions Panel Operations In order to follow along with the instructions given here, you should start out by having Master switched ON (depress the MASTER On/Off pedal and confirm that the MASTER ON/OFF indicator has lighted). Also, step on the Distortion On/Off pedal to switch OFF distortion (DISTORTION ON/OFF indicator extinguished). You should make GK LEVEL, OCTAVE LEVEL, DISTORTION, TONE, and LEVEL adjustments after first aligning the knob to the center position. fig.05 Try switching the MASTER On/Off pedal on and off as you get the b...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - OC-20G (859.59 kb)
Musikinstrumente - OC-20G (859.59 kb)