Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
The names on the labels correspond to trigger input jack names as follows. (input names shown here are for the TD-12 modules) Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Setting Up The Stand Components Main Features Fully Assembled View • View of Stand When Spread Open Specifications ** We recommend using an optional Roland drum mat (TDM series) to prevent scarring or discoloration of flooring by the rubber feet of the stand. View of Stand When Spread Open • A very solid and stable stand featuring ball clamps that allow precise adjustments for all pads and cymbals. • Cables are inside the pipes, providing a clean look and quick breakdown or setup. 1.3 m (51-3/16”) 120° 120° • Required Space for Set-up 1,200 (W) x 700 (D) x 1,100 (H) mm / 47-1/4 (W) x 27-9/16 (D) x 43-5/16 (H) inches (Drum Stand only) 1,500 (W) x 1,200 (D) x 1,250 (H) mm / 59-1/16 (W) x 47-1/4 (D) x 49-1/4 (H) inches (including Sound Module, Kick Pad, Cymbals and Stool) • Tube Diameter Stand: 38.1 mm / 1-1/2 inches Pad Arm/Cymbal Arm: 22.2 mm / 7/8 inches • Weight 16.8 kg / 37 lbs 1 oz (including Pad Mounts and Cymbal Mounts) * In the interest of product improvement, the specifications and/ or appearance of this unit are subject to change without prior notice. Working in order, following numbers 1–7 in the illustration, attach the curved pipes to the straight pipes. ** Of pipes “B,” the long one (600 mm) is Curved Pipe L, and the short one (550 mm) is the Center Pipe. ** Do not pass any cables through pipe “C” (Curved Pipe R). A Sound module mounting pipe (including the mounting plate) B Curved pipe L 600mm, Center pipe 550 mm (connection cables are inside) C Curved pipe R D Snare pipe 300 mm E Straight pipe 625 mm F Straight pipe 650 mm L G Straight pipe 650 mm R H Straight pipe 520 mm I Cymbal arm x 3 J Pad arm x 2 K Holder x 2 L Pad mount x 2, Memory lock (for pad mount) x 2 Drum key Cable clip Owner.s manual (this leaflet) Label KIK SNR T1 T2 T3 HH HHC Jack KICK SNARE TOM 1 TOM 2 TOM 3 HI-HAT HH CTRL Label CR1 CR2 RD RDE AX1 AX2 Jack CRASH1 CRASH2 RIDE EDGE AUX 1 AUX 2 Cable Use the cable clips as shown below, to secure the cables. Cable clip 600 mm 550 mm Height memory Label A B C E F G H I J K L • Position the cable in front • Align to position of Height Memory A B B C E D F G H I I I J J • Align to position of Height Memory * 5 1 0 0 0 1 2 3 9 3 - 0 1 * Copyright © 2009 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Roland and V-Drums a...