Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
* Exit all other applications of the Windows before you install the MA-1EX driver. * If you intend to connect the MA-1EX and other USB devices to your computer and use them simultaneously, disconnect all USB devices other than the MA-1EX from the USB connector before you install the driver. If a USB device other than the USB is left connected to your computer when you install the driver, the driver may not be installed correctly. In order to use the MA-1EX, you must first install the USB driver. These drivers are included with Windows or Mac OS. What is a driver? A driver is software that allows an application program running on your computer to transfer data to and from the MA-1EX when it is connected to your computer via a USB cable. Application Driver Computer USB cable USB connector MA-1EX The procedure for installation and settings will differ depending on your system. Proceed to the appropriate section as follows. • Windows XP/2000 users.......(p. 7) • Windows Me users................(p. 7) • Windows 98 users ................(p. 8) • Mac OS X Users.....................(p. 13) • Mac OS 9 Users.....................(p. 14) Getting Connected and Installing Drivers English Getting Connected and Installing Drivers English * In order to install software in Windows XP/ 2000, you must log on as a user who has administrative privileges (e.g., Administrator). 1. With the MA-1EX disconnected, start up Windows. * Disconnect all USB cables except for a USB keyboard and USB mouse (if used). * Exit all currently running software (applications). * If you are using a virus checker or similar software, be sure to exit it as well. 2. Use the USB cable to connect the MA-1EX to your computer, and turn on the MA-1EX’s power (turn the VOLUME knob toward the right). The MA-1EX (USB Audio) will be detected automatically, and the driver will be installed. If you are using Windows XP, the installation has been completed when the message near the taskbar saying that “Found New Hardware” has disappeared. This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting a USB connector is required before the unit will operate normally. 3. Restart Windows. Next, you need to make the driver settings. .“Settings and checking (Windows)” (p. 10) Windows Me users 1. With the MA-1EX disconnected, start up Windows. * Disconnect all USB cables except for a USB keyboard and USB mouse (if used). * Exit all currently running software (applications). * If you are using a virus checker or similar software, be sure to exit it as well. 2. Use the USB cable to connect the MA-1EX to your computer, and turn on the MA-1EX’s power (turn the VOLUME knob toward the right). This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting a USB connector is required before the unit will operate normally. 3. Windows will detect the MA-1EX (USB Audio), and the “Add New Hardware Wizard” dialog box will appear. Make sure that Automatic search for a better driver (Recommended) is selected, and click [Next]. 4. Driver detection will begin. 5. When the driver has been found, driver installation will begin. * Depending on your system, a certain amount of time may be required for the device to be detected after the driver has been installed. 6. Once the driver has been installed, a dialog box will inform you of this. Click [Finish]. 7. Restart Windows. Next, you need to make the driver settings. .“Settings and checking (Windows)” (p. 10) Getting Connected and Installing Drivers English Getting Connected and Installing Drivers English * The driver necessary for using the MA-1EX with Windows 98 is provided on the Windows CD-ROM. Make sure that you have the Windows CD-ROM available. * Some computers are sold with the contents of the Windows CD-ROM stored on the hard disk, and therefore will not come with a Windows CD-ROM. If this is the case for your computer, you’ll be able to install the driver even without the Windows CD-ROM. * The USB composite device driver is installed first, then the USB audio device driver is installed. Use the following procedure to install the drivers. 1. With the MA-1EX disconnected, start up Windows. * Disconnect all USB cables except for a USB keyboard and USB mouse (if used). * Exit all currently running software (applications). If you are using a virus checker or similar software, be sure to exit it as well. 2. Use the USB cable to connect the MA-1EX to your computer, and turn on the MA-1EX’s power (turn the VOLUME knob toward the right). * This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting a USB connector is required before the unit will operate normally. 3. USB composite device will be detected automatically, and the “Add New Hardware Wizard” dialog box will appear. Click [Next]. 4. When “What do you want Windows to do?” appears, select “Search for the best driver for your device (Recommended),” and click [Next]. 5. A dia...