Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
© Press f ENTER) to register the settings. When this is done, you'll be returned to the Function screen. From there, you'll be returned to the Master screen if you don't do anything further. 114 /-> The entry "FOR" is nul 111* IdSt nit 1 «■ii til Ihr Kunrrl ing range, but rather, how many li.tr-. in mi th< SrM bar are in this range So, for ('x.impli thi; nutd ■ turn TROM-IOK 1 nmild n t jn tint tin Kts Hiding **\irts trwi tin sit ind nirjsun anil run*, through the fifth measure. V_J With MIDI at ON, you should be aware that a greater amount of time will be requiied to process the update if your Song is some what longer than average. You may find it hi •> r i uinvinii ii1 to turn OFF the updating feature if you are doing a lot of fast forwarding and reversing, such as when you aieinthe process of editing a piece, and would prefer to keep going without bpc ndni? tirre Aaiting tor the updates (When OFF, the data will of cource not be updated, though) 11. Disk Functions 4. Composer If you press the f FUNCTION! key in the Composer section after pressing either ( LOAD) or (SAVE i you will be switched into the Disk Function Mode. There you can do all sorts of disk-related things, like Formatting or deleting files. You can cancel an operation at any point by pressing the [ DOT) button. a. Initializing a Floppy Disk ~ Format /-> Refer to page 76 for some lips on removing disks from the disk dnve V_> You will need to "initialize" a floppy disk for use with the KR-5500. The KR-5500 can automatically detect whether a disk is a 2HD or a 2DD type and Format it accordingly (2HD: 1440KB, 2DD: 720KB). Operation From the Master Screen : (T> Insert the floppy disk to be Formatted into the disk drive. © Press the I LOAD) or f SAVE) button, then the f FUNCTION) button in the Composer section. (3) Select the Disk Function screen using the i INC) or ( DEC) button. (4) Press f ENTER I (5) The Format starts when you press {ENTERl Once the disk has been formatted successfully, you'll be returned to the Master screen. 115 b. Delete Song Flies ~ Delete File As you Save new files onto a floppy disk, you may find other files which you'll want to delete. However, take some care with what files you delete, because once they're gone you can't retrieve them. Operation From the Master Screen : © Insert the floppy disk into the disk drive. © Press i LOAD ) or ( SAVE L then press the ( FUNCTIOTT) button in the Composer section. © Select the Delete Song File screen with the (INC ) or ( DEC) button. (4) Press (TNTEfPl i ,i r- f :••• | *—. i ; j\: |: From this screen, select the Song File to delete with the j INC j and ( DEC) buttons. © Press (ENTER) The Delete operation starts immediately. Once the song deletion is complate, you'll be returned to the Master screen. 116 4. Composer c. Delete User Program Files ~ Delete File You can delete unnecessary User Program files saved on a floppy disk with this operation. Remember, however, that deleted files can't be retrieved. Operation From the Master Screen : © Insert the floppy disk (containing the User Program files to be deleted) into the disk drive. @ Press ( LOAD ) or (SAVE), then press the f FUNCTION] button in the Composer section. (3) Select the Delete File screen with the f INC) or f DEC) button. 0 Press ( ENTER ). and then the ( WRITE) button. (D Select the User Program file to be deleted with the (INC) and ( DEC) buttons. © f>ress f ENTER) to start the User Program file Delete operation. Once the deletion has been completed, you'll be returned to the Master screen. 117 12. User Programs In addition to Song data, you can also store your User Programs settings onto floppy disk. You can cancel any procedure by pressing ( EXIT). a. Saving Your User Programs to Disk *.......................................................................s li thi’ disk hd*. rvi' been formatted for usebytheKR-5500, you will need to do so. Operation From the Master Screen : © Insert a formatted disk into the disk drive and press the I SAVE) button. (2) Press f WRITE) and you'll see the User Program Name entry screen. @ Enter the User Program Name. Using the ( UPPER/4 ) and [A/Kj buttons, position the cursor at the point where you want to enter a character. Use the (INC) or {DEC) buttons to select the character you wish to enter. Repeat the process until the User Program Name is entered to your satisfaction. @ Press { ENTER \ and the file is saved to disk. When you do step @, you'll see the following screen : This means that there is already a User Program on the floppy disk with the same file name as the one you want to save. If it's OK to overwrite the file, press f ENTER ); if it's not, press the ( EXIT) button to return to the Master screen. Modify the User Program Name so you can save it under a different file name. 4. Composer b. Loading the Settings for a User Program ✓ > When you load a User Program, the User Program settings previously contain...