Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
25, 2002 Version: 1.00 1. RECOGNIZED RECEIVE DATA ■CHANNEL VOICE MESSAGE •Control Change Status BnH Second ccH n = MIDI Channel No.: cc = Controller No.: Third vvH 0H - FH (ch.1 - ch.16) 01H - 1FH (1 - 31) 40H - 5FH (64 - 95) 00H - 7FH (0 - 127) * By specifying this as a source for “realtime parameter control” you can use these messages to control a target. •Program Change Status CnH Second ppH n = MIDI Channel No.: pp = Program No.: 0H - FH (ch.1 - ch.16) 00H - 7FH (No.1 - No.128) Patches will be selected according to the program number that is received. ■SYSTEM REALTIME MESSAGE •Timing Clock 2. TRANSMITTED DATA ■CHANNEL VOICE MESSAGE •Control Change Status BnH Second ccH n = MIDI Channel No.: cc = Controller Number: Third vvH 0H - FH (ch.1 - ch.16) 01H - 1FH (1 - 31) 21H - 5FH (33 - 95) 00H - 7FH (0 - 127) If you set up a system parameter “MIDI PC OUT” for “On,” Bank Select (00H, 20H) is transmitted when switching patch. If you set up a control change number at a system parameter “MIDI EXP Number,” control change information is transmitted when operating EXP pedal. If you set up a control change number at a system parameter “MIDI CTL Number,” control change information is transmitted when operating CTL pedal. If you set up a control change number at a system parameter “MIDI SUB CTL1 Number,” control change information is transmitted when operating CTL 1 pedal (SUB EXP pedal) of an outside connection. If you set up a control change number at a system parameter “MIDI SUB CTL2 Number,” control change information is transmitted when operating CTL 2 pedal (SUB EXP pedal) of an outside connection. •Program Change Status CnH Second ppH n = MIDI Channel No.: pp = Program No.: 0H - FH (ch.1 - ch.16) 00H - 7FH (No.1 - No.128) * If you set up a system parameter “MIDI PC OUT” for “On,” program change information is transmitted when switching patch. ■SYSTEM REALTIME MESSAGE •Active Sensing Status FEH When an Active Sensing message is received, the interval of all subsequent messages will begin to be monitored. If an interval greater than 400 misc. between messages, the display will indicate “MIDI Off Line!” ■SYSTEM EXCLUSIVE MESSAGE Status F0H Data Byte Status iiH,ddH ...eeH F7H F0H = System Exclusive ii = Manufacturer ID: 41H (Roland) dd ,..ee = Data : 00H - 7FH (0-127) F7H = EOX (End of Exclusive/System common) For more details, please refer to “Roland Exclusive Message.” •Start Status FAH •Stop Status FCH ■SYSTEM EXCLUSIVE MESSAGE Status F0H Data Byte iiH,ddH ... eeH Status F7H F0H = System Exclusive ii = Manufacturer ID : 41H (Roland ) dd ,..ee = Data : 00H - 7FH (0 - 127) F7H = EOX (End of Exclusive/System common) * For more details, please refer to “Roland Exclusive Message.” vv = Value: vv = Value Status F8H Copyright © 2002 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. 1 MIDI Implementation •MIDI Machine Control (MMC) Status Data Byte Status F0H iiH,ddH ... eeH F7H F0H = System Exclusive 7FH = ID Number (Universal Realtime Message) 7FH = Device ID (Broadcast) 06H = Sub ID#1 (Machine Control Command) com = Sub ID#2 (MMC Command) F7H = EOX (End of Exclusive/System common) * “com” (MMC Command) that I transmit with GT-6B is following. com 01H Stop 02H Play 3. EXCLUSICE COMMUNICATION On the GT-6B, exclusive messages can be used as follows. - Transmit/receive GT-6B system/patch data The model ID for GT-6B exclusive messages is 00H 50H, and you can set up the device ID at 00H --1FH. ■ONE WAY COMMUNICATION •Request Data 1 RQ1 (11H) Byte Description F0H Exclusive Status 41H Manufacturer ID (Roland) Dev Device ID (Dev=00H-1FH) 00H Model ID (GT-6B) MSB 50H Model ID (GT-6B) LSB 11H Command ID (RQ1) aaH Address MSB bbH Address ccH Address ddH Address LSB ssH Size MSB ttH Size uuH Size vvH Size LSB sum Checksum F7H EOX (End of System Exclusive) * This message can only be received, and is not transmitted from the GT-6B. •Data Set 1DT1(12H) Byte Description F0H Exclusive Status 41H Manufacturer ID (Roland) Dev Device ID (Dev=00H-1FH) 00H Model ID (GT-6B) MSB 50H Model ID (GT-6B) LSB 12H Command ID (DT1) aaH Address MSB bbH Address ccH Address ddH Address LSB eeH data ffH Data sum Checksum F7H EOX (End of System Exclusive) 2 MIDI Implementation 4. PARAMETER ADDRESS MAP The address and size are displayed under 7-bit hexadecimal notation. Address Binary MSB 0aaa aaaa 7-bit Hexadecima AA 0ccc cccc CC LSB 0ddd dddd DD Size Binary MSB 0sss ssss 7-bit Hexadecimal SS 0ttt tttt TT 0uuu uuuu UU LSB 0vvv vvvv VV Address Block Map Address OO OO OO OO O2 OO OO OO O2 O1 OO OO O2 O2 OO OO O2 O4 OO OO O2 OS OO OO O2 Ol OO OO O2 OB OO OO O4 OO OO OO OS OO OO OO 06 00 00 00 06 01 00 00 O6 2l OO OO O6 2B OO OO 06 4F 00 00 OB OO OO OO OB O1 OO OO OB 2l OO OO OA OO OO OO ...