Hersteller: Roland
Dateigröße: 306.45 kb
Dateiname:
|
Anleitung Zusammenfassung
Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES." These sections provide important information concerning the proper operation of the unit. Additionally in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Features This unit combines the functions of the FS-5L (latch type) and FS-5U (momentary type) foot switches. Both of the unit's foot switches may be set to function as either a latch or momentary type switch. You can connect to gear equipped with TRS 1 /4" phone jacks using a connection cable with stereo 1 /4" phone plugs at both ends. The FS-6 can be connected to another FS-6, a FS-5U/5L, or an AB-2. Panel Description 12. POWER Indicator 3 4 12 This lights when the power is on (when a plug is con- nected to a jack). * If this indicator goes dim or no longer lights while the power is on, the battery is near exhaustion and should be replaced immediately. 13. Battery Cover Open this cover to replace the battery. For instructions on replacing the battery, refer to "Changing the Battery." 14. FS Joint Panel The FS-6 can be connected to another FS-6, a FS-5U/5L, or an AB-2. 14 9 11 6 I 7 5 10 8 14 13 1. Pedal Switch A Use this as a switch for the device connected to Jack A or Jack A & B. Refer to "Connections." 2. Pedal Switch B Use this as a switch for the device connected to Jack B or Jack A & B. Refer to "Connections." 3. Pedal Switch A Indicator When pedal switch A is set to the latch type function, this indicator alternately lights or goes out each time the pedal switch is pressed. When pedal switch A is set to the momentary type function, this indicator lights only while the pedal switch is held down. 4. Pedal Switch B Indicator When pedal switch B is set to the latch type function, this indicator alternately lights or goes out each time the pedal switch is pressed. When pedal switch B is set to the momentary type function, this indicator lights only while the pedal switch is held down. 5. Jack A Connect the device being controlled with pedal switch A here. Use a connection cable with 1/4" phone plugs at both ends. 6. Jack B Connect the device being controlled with pedal switch B here. Use a connection cable with 1/4" phone plugs at both ends. 7. Jack A & B Connect devices equipped with TRS 1/4" phone jacks here. Use a connection cable with stereo 1 /4" phone plugs at both ends. * Jacks A, B, and A & B also function as power switches. The power is switched on when a plug is inserted in any of these jacks, and switched off when no plug is connected. Unplug any cable from these jacks whenever you are not using the unit. 8. POLARITY Switch A This switches the polarity of pedal switch A. After referring to the owner's manual for the device you are connecting, switch this to the appropriate setting. 9. POLARITY Switch B This switches the polarity of pedal switch B. After referring to the owner's manual for the device you are connecting, switch this to the appropriate setting. 10. MODE Switch A This sets the function for pedal switch A to LATCH or MOMENTARY. 11. MODE Switch B This sets the function for pedal switch B to LATCH or MOMENTARY. LATCH: Alternately switches on or off each time the pedal switch is pressed. MOMENTARY: Switches on (off) while the pedal switch is held down, and off (on) when the switch is released. Before Using Connect the battery supplied to the snap cord with correct polarity. ■ Connections * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Connecting to Jack A & B * When connecting to Jack A&B,do not plug any device into Jack A or Jack B. This may result in damage and/or malfunction. Connecting to Jack A or B ± 5 5 no; FSH5 ^3Q8 9 ■ Setting the POLARITY Switch When matching the FS-6's polarity setting with the polarity setting for the FS-5U or FS-5L given in the owner's manual for the device being connected, set as described below. * According to these settings, the setting switches to OPEN when the switch is on and CLOSE when the switch is off. POLARrTY FS-5L / FS-5U FS-6 ■ Changing the Battery When the POWER indicator goes dim or no longer lights while the power is on, it means that the battery is nearly dead and must be replaced. * When turning the unit upside-down, handle with care to avoid dropping it, or allowing it to fall or tip over. Use the FS-6 with BOSS or Roland devices compatible with the FS-5L or FS-5U. * No assurances can be given with respect to the proper functioning of this unit if it is connected with devices or jacks other than those specified. 1. Open the battery cover. 2. Remove the old battery from the battery housing, and remove the snap cord connected to...