Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Contents of the Package . PD-8 (pad unit) . Connection Cable (stereo) ¦ Owner's Manual (this manual) Panel Description Stand Fixing Screw Stand Fixing Screw Head Output Jack Making the Settings Attaching the Pad to a Stand Attach the PD-8 to a drum stand. When attaching the PD-8 to the pad mount, be sure to tighten the stand fixing screw securely. If any of them remain loose, the pad could fall off. Tighten Loosen Rod Pass the rod through the pipe that is inside the holder. When attaching the PD-8 to a commercially available tom stand, check the dimensions of the rod. Depending on the dimensions of the rod, it may not be possible to attach the pad to the stand. Acceptable rod diameters: 8.5–11.5 (3/8 to 1/2 inch) Connecting to a Percussion Sound Module To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 1. Use the included connection cable and connect the output jack of the PD-8 to the trigger input jack of the percussion sound module. Connect the L-shaped plug of the included cable to the PD-8. This will prevent strain from being applied to the PD-8. PD-8 PD-8 . Make the trigger settings for the percussion sound module. For the recommended values, refer to p. 12. Should you neglect to make the appropriate settings for the percussion sound module, you could likely experience the following problems: • Sometimes it does not sound (uneven volume) • The volume is too low (reduced sensitivity) For information on how to change the parameters for a percussion sound module, refer to the documentation for the percussion sound module you’re using. Specifications PD-8: Pad Pad Size: 8.5 inches Trigger: 2 (Head, Rim) Dimensions: 226 (W) x 280 (D) x 54 (H) mm 8-15/16 (W) x 11-1/16 (W) x 2-1/8 (H) inches Weight: 1.2 kg / 2 lbs 11 oz Accessories: Owner’s Manual, Connection Cable Options: Pad Mounts (MDH-7U, MDH-10), Drum Stands (MDS-3C, MDS-6, MDS-8C, MDS-10, MDS-20) In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. CY-8 Features • Velocity sensitive cymbal pad provides rich expression. • Designed specially for cymbals, the pad offers superior playing feel. Realistically reproduces the cymbal’s characteristic “swinging” motion. • You can use bow shots, edge shots, and choking techniques. Contents of the Box . CY-8 (cymbal pad unit) . Connection Cable (stereo) . Wing Nut . Felt Washer . Stopper ¦ Owner's Manual (this manual) Panel Description Bow Portion Edge Portion Pad Face Output Jack Making the Settings Attaching the Cymbal Pad to a Stand Attach the CY-8 to a cymbal mount. 1. Use a commercially available tuning key to tighten the stopper bolt. The stopper keeps the cymbal pad from turning, and prevents the cables from catching or getting tangled on the stand. Stopper (Be sure to orient it correctly) Tighten the bolt with a commercially available tuning key. 2. Attach the CY-8 so the Roland logo is positioned on the opposite side of the playing area. 3. Tighten the wing nut to obtain the desired movement. Use the included felt washer and the wing nut. Wing Nut Felt Washer Take care to ensure that the cables do not touch the cymbal units and/or the stand. A cable touching a cymbal unit or a stand may cause double sounding or other incorrect operation. Connecting to a Percussion Sound Module To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. CY-8 CY-8 . Use the included connection cable and connect the output jack of the CY-8 to the trigger input jack of the percussion sound module. Connect the L-shaped plug of the included cable to the CY 8. This will prevent strain from being applied to the CY-8. To make use of edge shot and choking play techniques, you’ll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. 2. Leave some slack in the cable to ensure that they are not pulled by the movement of the CY-8 when struck. Leave some slack in the cable 3. Make the trigger settings for the percussion sound module. For the recommended values, refer to p. 12. Should you neglect to make the appropriate settings for the percussion sound module, you could likely experience the following problems: • Sometimes it does not sound (uneven volume) • The volume is too low (reduced sensitivity) For information on how to change the parameters for a percussion sound module, refer to the documentation for the percussion sound module you’re using. Playing the CY-8 Bow Shot This is the most common playing method, playing the pad face of the cymbal. It corresponds to the sound of the “head-side” of the connected trigger input. Bow Edge Shot This playing method involves striking the edge with the shoulder of the stick. It corresponds to the sound of the “rim- side” of the connected trigger input. ...