Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Anleitung Roland, modell C-30

Hersteller: Roland
Dateigröße: 3.74 mb
Dateiname:
Unterrichtssprache:en
Fotos und technische Daten  Roland  C-30
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


* Roland Corporation would like to thank the collection Molinari-Pradelli, for the authorization to reproduce the picture entitled ‘Estasi de Santa Maria Madalena’ by Marcantonio Franceschini, for this limited edition of the C-30 Harpsichord. Assembling the C-30 stand (1) Side board A (2) Side board B (3) Center board C (4) Center board D (5) Allen wrench (6) Knob bolts (2 pcs.) (7) DP-10 (Accessory pedal) * refer to C-30 owner‘s manual 1. Attach one end of center board “C” to side board “A.” Orient center board “C” so that the hardware is on the inside, and hook the hardware of center board “C" onto the pins of side board “A,” and press center board “C” downward. 2. Attach the other end of center board “C” to side board “B.” Use your hand to support center board “C,” and hook the hardware of center board “C” onto the pins of side board “B,” and press center board “C” downward. 3. Attach center board “D.” Orient center board “D” so that the hardware is on the inside, and hook the hardware at each end of center board “D” onto the pins of side boards “A” and “B” and press center board “D” downward. 4. Using the included Allen wrench, tighten the bolts that are already installed in the center boards. First, lightly tighten the bolts at the four locations, and then tighten the bolts firmly so that the stand does not rock or wobble. * If you will be replacing the decorative panels, do so before placing the instrument on the stand. For details on how to replace them, refer to the instructions included with the decorative panels. * After you’ve finished assembling the stand, attach the included Allen wrench to the holder located on the inside of side board “A” to prevent it from being lost. Unlock the holder, place the Allen wrench in position, and then re-lock the holder. When you unlock the holder, push up the parts marked (a) in the illustration. 5. Align the main unit with the stand. Place the main unit on the stand so that the four feet on the bottom of the unit fit within the inside of the stand, and then firmly tighten the two knob bolts to fasten the unit onto the stand. * Be careful not to pinch your hands. • Remove the two knob bolts, separate the main unit from the stand, and then loosen the four bolts of the center boards to disassemble the stand in the reverse order of assembly. * Loosening the bolts until their heads are visible will allow you to disassemble the stand. Do not remove the bolts entirely. • If the instrument is to be moved within the same room, it must be carefully moved by two people holding the instrument at the locations shown in the diagram. • If the instrument is to be moved out of the room or into a different room, you must separate the main unit from the stand and carry them separately. The portion that connects the main unit and stand may be damaged if you attempt to transport the instrument without separating the main unit and stand. • When moving the main unit and stand, carry them in a horizontal position. • Make sure that another person is on hand to help with the assembly and setup. • When assembling the stand, be careful not to apply excessive force to any part. Doing so may deform the hardware or damage the wooden parts. • When assembling or moving the stand, be careful not to pinch your hands or drop the unit on your feet. • Should you remove the knob bolts, keep them in a safe place out of children’s reach, so there is no chance of them being swallowed accidentally. Check the included items (2) (3) (4) (5) (6) (7) (1) Wider Assembly procedure A C A C B A C B D Allen wrench Caution when disassembling the stand When moving the instrument (a) Knob bolt Foot Information Information distributor in your country as shown below. PHILIPPINES CURACAO URUGUAY NORWAY JORDAN AFRICA G.A. Yupangco & Co. Inc. Zeelandia Music Center Inc. Todo Musica S.A. Roland Scandinavia Avd. MUSIC HOUSE CO. LTD. EGYPT 339 Gil J. Puyat Avenue Orionweg 30 Francisco Acuna de Figueroa Kontor Norge FREDDY FOR MUSIC Makati, Metro Manila 1200, Curacao, Netherland Antilles 1771 Lilleakerveien 2 Postboks 95 P. O. Box 922846 Al Fanny Trading Office PHILIPPINES TEL:(305)5926866 C.P.: 11.800 Lilleaker N-0216 Oslo Amman 11192 JORDAN 9, EBN Hagar Al Askalany TEL: (02) 899 9801 Montevideo, URUGUAY NORWAY TEL: (06) 5692696 Street, DOMINICAN REPUBLIC TEL: (02) 924-2335 TEL: 2273 0074 ARD E1 Golf, Heliopolis, SINGAPORE Instrumentos Fernando Giraldez KUWAIT Cairo 11341, EGYPT SWEE LEE MUSIC Calle Proyecto Central No.3 VENEZUELA POLAND EASA HUSAIN AL-YOUSIFI TEL: (022)-418-5531 COMPANY PTE. LTD. Ens.La Esperilla Instrumentos Musicales ROLAND POLSKA SP. Z O.O. & SONS CO. REUNION 150 Sims Drive, Santo Domingo, Allegro,C.A. UL. Gibraltarska 4. Al-Yousifi Service Center Maison FO - YAM Marcel SINGAPORE 387381 Dominican Republic Av.las industrias edf.Guitar PL-03 664 Warszawa P.O.Box 126 (Safat) 13002TEL:(809) 683 0305 import POLAND 25 Rue Jules Hermann, TEL: 6846-3676 KUWAIT Chaudron - BP79 97 491 #7 zona Industrial de Turu...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien