Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
m. m m Bedienungsanleitung Mode d'emploi Manuale di Istruzioni — 2nd Edition — PANEL DESCRIPTION [1] Data Entry This potentiometer sends assignable control messages. When on, it is assigned to control volume through Control Change Volume Message (CC-7). [2] Data Entry Assign This button assigns one of the "Control Change” messages to the Data Entry Potentiometer. [3] Transposer On/Off This button activates or de-activates transposition, and is used for transposition settings. [4] Start/Stop This button controls Start and Stop of external accompaniment units or sequencers sending Start and Stop messages via MIDI (FA, FC). [5] Expression Bar Assignable to After Touch, Modulation and Pitch Bender This device enables Modulation, After Touch and Pitch Bender effects. [6] Patch On/Off Enables activation or de-activation of patch mode. When on (Mode Patch On) it assigns the numerical buttons to patch selection. [7] Sub Capital CC 00 This button assigns the numerical buttons to value CC 00 used to select a Sub Capital Tone. In Patch mode, it selects patch numbers 13 or 29. [8] Sub Capital CC 32 This button assigns the numerical buttons to value CC 32 used to select a Sub Capital Tone. In Patch mode, it selects patch numbers 14 or 30. [9] Capital Program Change This button assigns the numerical buttons to value selection of Program Change via MIDI. When in Patch mode, it selects patch numbers 15 or 31. [10] Numerical Buttons When in Patch mode they enable selecting patches from 1 to 10 or 17 to 26. When in Free Panel mode, they select Program Change numbers, MIDI Channels or Parameters. [11] Write Enables storing a Patch into any of the 32 Memory Patches available. [12] Enter This button is used for confirmation of selections on numerical buttons. When in Patch mode, it selects patch numbers 11 or 27. [13] MIDI/Parara. This button assigns numerical buttons to the setting of MIDI channels or modification of parameters. When in Patch mode, it selects patch numbers 12 or 28. [14/15] Octave Up & Octave Down They are used to transpose the keyboard one octave up or down, respectively. [16] Patch Down/Up This button works in Patch mode only, and enables to quickly change from one patch to the following or previous one. If you press Patch Up from Patch 32, Patch 1 will be selected. If you press Patch Down from Patch 1, Patch 32 will be selected. [17] Sustain Sustain control. [18] Patch 17/32 This button enables selection of patch recall by means of the 16 tabs assigned to. them. If on (LED lit), the tabs assigned to recall the patches will select patches from 17 to 32. [19] Edit Enables selection of any of the sections to assign with Program Change, Octave Up/Down, MIDI Channels, etc... [20] Kbd Mode Selects the following keyboard modes in sequence: Upper, Lower, Upper + Lower. [21] Chorus On/Off Activates or de-activates Chorus on section assigned by LED Edit when lit with GS receiver. [22] Reverb On/Off Activates or de-activates Reverb on section assigned by LED Edit when lit with GS receiver. [23] Power Switch General power switch. [24] AC Adaptor Socket This socket enables connections with an external power adaptor. [25] MIDI Out Socket Enables MIDI Out connection. Mr-* *x> h ')--oih •' Ztitza > b a-ji,'? X. > ho-A't £ C to {2]t-9 • x > h >J - • T-tH” > • > 3> h □ — x > i'tffB© f- 'J — o [3]+- • h 7 > X * - X • #9 > *-• 1- -7 'sZtf-X&t >/*7 Li to i fc, tf-XfiSrtSSL i-fo 14]xi- h IX b ~J 7 • #9 > MtDlT-X*- K 7- b •yT'ttlSfcsS-SC.iK.fc-oT, «2!K X h -j-rZ^s'cv-HLito [5-j -> 3 (77?-? yf\ >, KilO^T) =■ t'~> a №779- 9 y i Z ¿¿