Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Roland Dateigröße: 11.13 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Musikinstrumente - AT-45 (9.36 mb)

5. Touch < >< > to select the number of the save destination. Numbers which have not been used in the saving operation will be displayed as “- - - - -.” To cancel the save, touch the to close the Rhythm Save screen. You can change the name of a rhythm by touching . 6. Touch . The User rhythms are saved to the User memory or to floppy disks. You can save rhythms after changing the tempo by pressing the Tempo [ ] [ ] button. If the following screen appears The following screen appears if you select a number to which a rhythm has already been saved and then touch . If you wish to overwrite the rhythm 1. Touch . The Rhythm will be rewritten. If you wish to save new data instead of updating the rhythm 1. Touch . Rewriting of the Rhythm will be canceled. 2. In the Rhythm Save screen, select the number that is displayed as “-----” (a number that currently does not contain rhythm data). 3. Save the Rhythm. Chapter 10 Various Other Settings Adjusting How the Instrument Responds ¦ Adjusting the Initial Touch Sensitivity Initial Touch is a function that translates the force used in playing the keys into a directly proportional amount of volume. This adjusts the amount of the Initial Touch effect applied. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch either , or . ¦ Changing the Pedalboard Polyphony You can set the Bass Pedalboard to play simultaneous multiple notes or single notes only. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Pedalboard screen appears. 3. Touch < >< > to display the PedalBass Mode. UPPER To change the initial touch setting of the Upper part LOWER To change the initial touch setting of the Lower part 3. Touch < >< > to display the Initial Touch. 4. Touch the Initial Touch value (OFF, 1–10). 5. Touch < >< > to change the setting. Setting OFF, 1–10 4. Touch the PedalBass Mode setting to switch between “MONOPHONIC” and “POLYPHONIC.” Each time you touch the PedalBass Mode setting, it will alternate between “MONOPHONIC” and “POLYPHONIC.” Setting Descriptions MONOPHONIC Only single notes can be played. POLYPHONIC Multiple notes can be played. 5. Touch . Setting Descriptions 1–10 Initial Touch is on. The harder you play the key, the higher the volume. The change in volume when the keys are played forcefully increases as the value is increased. OFF Initial Touch is off. Volume remains constant regardless of how hard you play. 6. Touch . Chapter 10 Various Other Settings Performance Function Settings ¦ Selecting the Range of Keys to Which the Damper Pedal will Apply You can specify which keyboard will be affected when you press the Damper (Sustain) pedal. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Controller screen appears. 3. Touch < >< > to display the Damper Pedal. 4. Touch the Damper Pedal setting to switch between “to UPPER” and “to LOWER.” Each time you touch the Damper Pedal setting, it will alternate between “to UPPER” and “to LOWER.” Setting Descriptions to UPPER The effect is applied to the voices played on the Upper keyboard. to LOWER The effect is applied to the voices played on the Lower keyboard. 5. Touch . NOTE If the voice is a percussive voice (such as a Piano voice), the tone will be sustained, but fade away just like an acoustic piano. If the voice is a non-percussive instrument (such as a String voice), the tone will be sustained as long as the pedal is depressed. ¦ Changing the Function of the Expression Pedal Specify how the Expression Pedal will function when your performance is being recorded and when ATELIER song data are being played back. Function During Recording Specify whether Expression Pedal operations will be recorded or not while your performance is being recorded. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Controller screen appears. 3. Touch < >< > to display the Exp. Src (Rec). 4. Touch the Exp. Src (Rec) setting to switch between “PEDAL” and “COMPOSER.” Each time you touch the Exp.Src (Rec) setting, it will alternate between “PEDAL” and “COMPOSER.” Setting Descriptions PEDAL Expression Pedal movements will be recorded. The previous recording will be erased as new songs are recorded. COMPOSER Expression Pedal movements will not be recorded. The previous data will remain without being erased. 5. Touch . Chapter 10 Various Other Settings Function During Playback You can specify whether or not the Expression Pedal will function while ATELIER song files are being played back. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Controller screen appears. 3. Touch < >< > to display the Exp. Src (Play). 4. Touch the Exp. Src (Play) setting. 5. Touch < >< > to change the setting. Setting Descriptions PEDAL +COMPOSER The Expression Pedal will fun...

Herunterladen

Geben Sie zwei Ziffern: