Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Extron electronic Dateigröße: 5.31 mb Dateiname: Unterrichtssprache:

X4$ = Number of bytes to read X4% = E-mail event number (1 - 64) X4^ = E-mail recipient’s address X4& = Name of e-mail file to be sent First line of the file is the subject. The rest is the body of the e-mail. X4( = Default name: a combination of the model-name and the last 3 character pairs of the unit’s MAC address (e.g., MGP-464-00-02-3D) X5! = Extended security (password) levels: 1-10 The response is returned as two digits with a leading zero. X5@ = Connection’s security level 0 = anonymous 1 through 10 = extended security level 11 = user 12 = administrator X5# = (Ethernet only) Number of seconds before timeout on IP connections (min = 1, max = 6500, and default = 30 = 300 seconds). If no data is received during the timeout period, the Ethernet connection is closed. Each step is 10 seconds. When the unit is connected via RS-232/422, only the global timeout commands apply; anything else returns an E13 error code. The response is returned with leading zeros. X5$ = ASCII digit(s) representing the numeric value of the data element read from the event buffer (leading zeros are suppressed) X6^ = Login without password is allowed. If enabled, the user does not enter a password. After the user clicks OK, the login level is set based on the setting in the X6* parameter. 0 = Disabled 1 = Enabled X6* = No-password login level 1 through 11 = Entry without password goes to the level specified if an administrator password exists. 0 = Entry without password is placed one level below the lowest password level (0 through 11). The response is returned as two digits with a leading zero if needed. X6( = Number of seconds (in tens of seconds) before timeout on IP connections X7) = Number that is inserted into the e-mail message if the .eml file has an embedded E } command with no parameters. Use 0 as a placeholder if the optional X4& is used, but X7) is not needed. X50) = Input 1 through 19 X50@ = Window 0 = All windows (available only for Freeze and window muting) 1 = Window 1 2 = Window 2 3 = Window 3 4 = Window 4 X50# = Input video format 1 = RGB 2 = YUV-HD 3 = RGBcvS 4 = YUVi 5 = S-video 6 = Composite 7 = DVI X50$ = Test pattern 0 = Off 1 = Colorbars 2 = X-hatch (crosshatch 16x12) 3 = 4 x 4 X-hatch 4 = Grey scale 5 = Ramp 6 = Alt. pixels (alternating pixels) 7 = White field 8 = Crop 9 = Side By Side (4x3 crop) 10 = Quad Split (4x4) 11 = Pip Images (4 x 3 PIP column) 12 = 1.78 Aspect (4 x 3/16 x 9 with 1.78 film aspect ratio) 13 = 1.85 Aspect (4 x 3/16 x 9 with 1.85 film aspect ratio) 14 = 2.35 Aspect (4 x 3/16 x 9 with 2.35 film aspect ratio) X50% = Window text position 0 = None 1 = Bottom left 2 = Bottom center 3 = Bottom right 4 = Top left 5 = Top center 6 = Top right X50^ = Window text, 16 characters maximum. The following characters can be used: Symbols: : / – _ + “ (space) Numerals: 0 through 9 Letters: Lowercase a through z and uppercase A through Z X50& = Picture adjustment range (0 - 127; default = 64) X50* = Scaler resolution 1 = 640 x 480 2 = 800 x 600 3 = 852 x 480 4 = 1024 x 768 5 = 1024 x 852 6 = 1024 x 1024 7 = 1280 x 768 8 = 1280 x 1024 9 = 1360 x 765 10 = 1365 x 768 11 = 1366 x 768 12 = 1365 x 1024 13 = 1400 x 1050 14 = 1600 x 1200 15 = 480p 16 = 576p 17 = 720p 18 = 1080i 19 = 1080p 20 = DVI background input resolution X50( = Detected input signal standard 0 = None 1 = NTSC 2 = PAL 4 = SECAM – = Not applicable (occurs when input is set for RGB or YUV) X51) = Sharpness (detail) level (0 through 127) X51! = Window transition effect type 1 = Cut 2 = Dissolve 3 = Soft wipe up 4 = Soft wipe down 5 = Soft wipe right 6 = Soft wipe left 7 = Soft wipe center in 8 = Soft wipe center out 9 = Soft wipe square in 10 = Soft wipe square out 11 = Soft wipe curtain in 12 = Soft wipe curtain out 13 = Hard wipe up 14 = Hard wipe down 15 = Hard wipe right 16 = Hard wipe left 17 = Hard wipe center in 18 = Hard wipe center out 19 = Hard wipe square in 20 = Hard wipe square out 21 = Hard wipe curtain in 22 = Hard wipe curtain out X51@ = Blanking adjustment range (0 through 255; default is 128.) X51# = Window preset (1 through 128) X51$ = Input preset (1 through 128) X51% = Scaler refresh rate 1 = 50 Hz 2 = 60 Hz 3 = 72 Hz 4 = 96 Hz 5 = 100 Hz 6 = 120 Hz 7 = DVI background input refresh rate X51^ = Pixel phase (0-31) X51& = Advanced picture settings value (Range is the auto-sensed value ±512 lines or pixels.) X51* = Window dissolve speed; 0 to 5 seconds in 0.1 second increments (e.g., 01 = 0.1 second; 50 = 5.0 seconds) X51( = Internal temperature in degrees Fahrenheit X52) = Text string of up to 200 characters. Permitted characters include letters A-Z, digits 0-9, and the minus sign (–). No blank or space characters are permitted as part of a name. No distinction is made between upper- and lowercase letters. The first character must be a letter. The last character cannot be a minus sign. X52! = Image/Window shift value (Zero location is 2048, and limits are ± the output resolution.) Example: Front panel displays +50, but the re...

Herunterladen

Geben Sie zwei Ziffern: