Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Roland Dateigröße: 20.08 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Musikinstrumente - OCTAPAD SPD-30 (17.93 mb)

1. Choose MENU • AMBIENCE • AMBIENCE (p 16) The AMBIENCE-AMBIENCE screen appears. Ambience on/off Ambience type Final output level meter Ambience depth [Knob 3] (–/+) edits the value. [Knob 1] (SEL) selects a parameter. 2. Turn [Knob 1] (SEL) to select a parameter 3. Turn [Knob 3] (–/+) to edit the parameter Parameter Value Explanation Ambience on/off Switch OFF, ON You can also turn ambience on/off from the KIT screen by choosing QUICK MENU UAmbience ON/OFF. Type 1–7 Ambience type Depth 1–10 Ambience depth Equalizer Settings (AMBIENCE-EQ) Here’s how to make Equalizer settings that adjust the tonal character of the low, middle and high frequency ranges. 1. Choose MENU • AMBIENCE • EQ (p 16) The AMBIENCE-EQ screen appears. The editing procedure is the same as for Ambience. Parameter Value Explanation Switch OFF, ON Equalizer on/off High -12–+6 dB High range boost/cut Mid -12–+6 dB Middle range boost/cut Low -12–+6 dB Low range boost/cut Limiter Settings (AMBIENCE-LIMIT) Here’s how to make Limiter settings that compress sounds that are louder than a specified volume level, thus making the volume more consistent. 1. Choose MENU • AMBIENCE • LIMIT (p 16) The AMBIENCE-LIMIT screen appears. The editing procedure is the same as for Ambience. Parameter Value Explanation Switch OFF, ON Limiter on/off Threshold -12–0 dB Volume level at which compression will begin Advanced Operation 2 (Phrase Loop) Creating a Phrase For an overview of Phrase Loop, refer to “What is a Phrase Loop?” (p. 9). Measures, Time Signature (Beat) and Metronome (Click) Sound Settings (SETUP) Hold down the [STANDBY] button; the PHRASE LOOP SETUP screen appears. The position you hit on the pads will be selected. The upper row is Measures, the lower row is Beat. You can also edit the values by turning [Knob 1] (MEAS) or [Knob 2] (BEAT). Press [Button 2] (CLICK); a bar appears above the button, and the click (Metronome) will start. For details on operation, refer to “Measures, Time Signature (Beat) and Metronome (Click) Sound settings” (p. 26). Parameter Value Explanation Number of measures in the phrase. Measures 1–96, FREE If you choose “FREE,” use the [SET LOOP] button during recording to set the loop point (see below). You can use “Default Measures” (p. 51) to specify the default value of this parameter. Time signature of the phrase. Beat 1–9 You can use “Default Beat” (p. 51) to specify the default value of this parameter. Metronome (click) sound on/off. You can use “Default Click” (p. 51) to specify the default value of this parameter. Click OFF, ON As described in “Metronome (Click) Sound Settings (PHRASE LOOP SETUP-CLICK)” (p. 51), you can make the click sound only on the first pass of the loop, change the type of click sound, and adjust the click volume. Using the [SET LOOP] Button to Set the Loop Point If the STANDBY screen’s Measures parameter is set to “FREE,” you can use the [SET LOOP] button to set the loop point during recording. If Measures is set to “FREE,” the [SET LOOP] button will blink during recording (or during playback). When you’ve entered the measure at which you want to loop, press the [SET LOOP] button; the end of that measure will be set as the loop point. * You can’t set the loop point in the middle of a measure Press the [SET LOOP] button Using a foot switch to set the loop point If you connect a foot switch (FS-5U, sold separately; p. 53) and set the system setting “Foot Sw” (p. 53) to “PHRASE-LOOP CTRL,” you’ll be able to set the loop point by pressing the foot switch. Overview Basic Adv. 1 (Kit) Adv. 2 (Phrase) The first time you hold down the foot switch, the SETUP screen appears (Same operation as the [STANDBY] button) The third and subsequent times you press the foot switch, you’ll switch between PLAY and REC (Same operation as the [PLAY]/[REC] button) The second time you press the foot switch, the end of the measure will be set as the loop point (Same operation as the [SET LOOP] button) 43 Quantize and Tempo Settings (STANDBY) Quantize and Tempo Settings (STANDBY) The currently selected kit is shown here. Turn [Knob 3] (TEMPO) to set the tempo. You can set the tempo by pressing [Button 3] (TAP) four times or more at the desired tempo (Tap Tempo). In the same way, you can also set the tempo by holding down [Button 3] (TAP) and striking a pad four times or more at the desired tempo. Turn [Knob 1] (QTZ) to set the quantization. If you select “OFF,” quantization will not be applied. Press [Button 2] (START) or hit a pad to start recording. For details on operation, refer to “Quantization and tempo settings” (p. 27). Parameter QTZ (Quantize) Value OFF, 8, 12, 16, 24 Explanation The Quantize function automatically corrects inaccuracies in the timing at which you play the pads during recording. If you’ve enabled Quantize, your hits will be recorded at precise intervals of 8th notes, 12th note triplets, 16th notes, or 24th note triplets. Quantize works only during recording. This is the tempo of the phrase. If the OCT...

Herunterladen

Geben Sie zwei Ziffern: