Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Fender Dateigröße: 367.1 kb Dateiname: Unterrichtssprache:

• 160 watts of output power @ 4 ohms (100 watts @ 8 ohms). • Rear panel Effects Loop jacks for connection to external effects devices or “add-on” amplifiers. • Balanced 3-pin XLR line out jack for connection to re c o rding or sound-re i n f o rc e m e n t equipment. • Classic Fender spring Reverb effect. • Footswitch jack with channel and pre-amp switching capabilities. The operation and functions of all three versions (Stage 100 and Stage 160 “amplifier/speaker combinations” and the Stage 100H “amplifier head only”) are identical except for the speaker output functions (see items 3-5 under Rear Panel Functions). 1. INPUT 1 - Plug in your guitar at this jack. 2. INPUT 2 - A lower impedance / sensitivity input for guitars with active pickups. Both inputs are identical if used simultaneously. • NOTE: The N o rmal channel must be selected for items 3-7 to function. See CHANNEL SELECT (item 10). 3. VOLUME (Normal Channel) - Adjusts the loudness of the of the amplifier while in the Normal channel. 4. TREBLE - Adjusts the high-frequency level of the Normal channel. 5. MID - Adjusts the mid-frequency level of the Normal channel. 6. BASS - Adjusts the low-frequency level of the Normal channel. 7. REVERB - Adjusts the REVERB effect level of the Normal channel. • NOTE: The Drive channel must be selected for items 8-9 and 11-16 to function. See CHANNEL SELECT (item 10). 8. DRIVE CHANNEL-MODE INDICATORS - Red LED indicates MORE DRIVE boost is ON. Yellow LED indicates MORE DRIVE boost is OFF. See MORE DRIVE pre-amp boost (Item 12). 9. DRIVE - Adjusts the pre-amp level (distortion/ sustain) of the Drive channel in conjunction with Drive channel VOLUME c o n t ro l (item 11) to set the overall amplifier loudness. 10.CHANNEL SELECT - Button IN selects the Drive channel. Button OUT selects the Normal channel. 11.VOLUME (Drive channel)- Adjusts the amplifier loudness while in the Drive channel in conjunction with the DRIVE control (item 9). 12.MORE DRIVE - Button IN activates the MORE DRIVE pre-amp boost. This boost enhances the intensity of the DRIVE control (item 9). Button OUT deactivates MORE DRIVE boost. 13.TREBLE - Adjusts the high-frequency level of the Drive channel. 14.MID - Adjusts the middle-frequency level of the Drive channel. 15.BASS - Adjusts the low-frequency level of the Drive channel. 16.REVERB - Adjusts the REVERB effect level of the Drive channel. 17.POWER INDICATOR - Illuminates when the amplifier is ON and receiving power. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 STAGE 100H SPEAKER JACKS STAGE 100 SPEAKER JACK 1 2 5 6 7 8 93 4 1 . POWER SWITCH -Tu rns the AC power ON and OFF. 2. LINE CORD - This amplifier is equipped with an IEC grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded AC receptacle in accordance with the voltage and frequency ratings listed on the rear panel under INPUT POWER. • NOTE: Items 3 and 4 apply only to the Stage 100H. 3. SPEAKER OUTPUT (8W minimum) - Use this output jack when only one 8W speaker enclosure is to be connected to the Stage 100H. If two 8W speaker enclosures are to be connected, use both parallel speaker output jacks (total load of 4W). 4 . SPEAKER OUTPUT (4W minimum) -Use this output jack when o n e 4W speaker enclosure is to be connected to the Stage 100H. (Using this jack inte...

Herunterladen

Geben Sie zwei Ziffern: