Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Note • Auto Power Off is disabled (it does not function) when you are using the AC adaptor to power the keyboard. ¦ Power On Alert Keyboard keys light to alert you if you leave power on and do not perform any operation for about 6 minutes. Note that keys light only, and no sound is produced. When this happens, press any button or keyboard key to clear the power on alert. Note • Power on alert operates only when you are powering the keyboard using the AC adaptor. It does not operate when you are using batteries. ¦ To disable Auto Power Off and power on alert Hold down the TONE button while turning on the keyboard to disable Auto Power Off and power on alert. • When these functions are turned off, the keyboard does not turn off automatically and no alert is performed no matter how long it is left with no operation being performed. • Auto Power Off and power on alert are enabled again when you manually turn off power and then turn it back on again. E-16 478B-E-018A Basic Operations This part of the manual provides you with the basic information you need to use your keyboard. ¦ To switch power on and off 1. Set the POWER/MODE selector to NORMAL. POWER/MODE ON OFF FINGERED CASIO CHORD NORMAL 2. Press the keyboard keys. 3. The VOLUME up and down arrow buttons are used to adjust main volume. VOLUME • Pressing or displays the currently set volume setting. Press or again to change the volume setting. • Volume can be adjusted over a range of 0 (minimum) to 9 (maximum). • Volume is set to 7 when the power is turned on. • A setting of 0 turns down the volume completely. • The volume can be changed continuously by continuously pressing down the or buttons. • Pressing the and buttons simultaneously sets the volume to level 7. • Numeric values can be entered directly with the number buttons after the VOLUME button has been pressed in step 3. • The amount that the volume settings raises or lowers the volume level differs according to the tone, auto accompaniment, or song you are using. 4. To switch power off, set the POWER/MODE selector to OFF position. POWER/MODE ON OFF FINGERED CASIO CHORD NORMAL ¦ To change tones 1. Look at the tone list printed on the keyboard’s console and find the one you want. • A total of 100 tones are available. 2. Press the TONE button. • When you do, the TONE icon lights. • The number for the tone that is currently selected is shown on the display. TONE icon 478B-E-019A E-17 3. Use the number buttons to input the 2-digit number that identifies the tone you want to select. NUMBER0 1 2 3 4 5 6 7 8 9 • Always enter two digits for the tone number. If you enter only one digit, the display will automatically return to the previous tone number setting after a few seconds. • If you change the tone setting while a keyboard key is depressed, the tone does not change until you release the key and press a keyboard key again. • With certain tones (such as percussion sounds and sound effects), there may be very little or no change at all in the pitch, no matter which keyboard key you press. • If you input the wrong first digit for a tone number, you can return to the previous setting by pressing the TONE button. Keyboard split tones Some of the preset tones split the keyboard and assign two or more sounds. With such a preset tone, the sound produced depends on what position of the keyboard you play. For example, BASS/PIANO (tone 90) puts BASS on the left and PIANO on the right of the keyboard.
Musikinstrumente - LK-40 (1.4 mb)
Musikinstrumente - CTK-671 (1.4 mb)
Musikinstrumente - CTK-691 (1.4 mb)
Musikinstrumente - CTK491 (1.4 mb)