Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sony Dateigröße: 681.45 kb Dateiname: Unterrichtssprache:

• The expanded menu mode (EXPAND) lets you make precise individual adjustments to the equalization and low cut frequency of the front, centre, and rear speakers, and determine the default settings for the digital inputs. Note If you switch from EXPAND mode to BASIC mode, the adjustments made in the EXPAND mode are retained. However, if you adjust parameters from the same menu in the BASIC mode, those settings change accordingly. For example, when you switch to the basic mode, the individual tone controls for each speaker (in the EQUALIZER menu) are preserved. However, a single adjustment to the general tone controls (in the SURROUND menu) sets all speaker equalizations to the front speaker settings. MENU +/– 1 Push the MENU knob repeatedly to display one of the following menus: BASIC mode EXPAND mode LEVEL ADJUST menu LEVEL ADJUST menu SURROUND menu SURROUND menu SP. SETUP menu EQUALIZER menu CUSTOMIZE menu SP. SETUP menu CUSTOMIZE menu 2 Turn the MENU knob to select the parameter you desire from the respective menu. 3 Turn the +/– knob to select the setting you desire. The setting is entered automatically. 4 Repeat steps 1 through 3 to make all necessary adjustments. you desire from the respective menu 3 Press +/– repeatedly to select the setting you desire. The setting is entered automatically. 4 Repeat steps 1 through 3 to make all necessary adjustments. Note Certain menu items may not be available for adjustment depending on the current settings and menu modes. Unavailable items appear dimmed when shown in the display. LEVEL ADJUST menu The LEVEL ADJUST menu contains speaker level adjustment parameters that allow you to balance output level to each speaker. z Most of these settings can also be adjusted directly using remote. See “Adjusting the speaker volume” (page 9). Test tone Initial setting is : TEST TONE OFF Lets you turn the test tone on and off. • When the menu mode is set to BASIC, you can select between “OFF” and “[ ] auto”. “[ ] auto” provides the same test tone activity as the described on page 8. • When the menu mode is set to EXPAND, you can select which speaker will emit the test tone; [L]: left (front), [C]: centre, [R]: right (front), [SR]: rear right, [SL]: rear left. Front speaker balance Initial setting is : FRONT L ___1___ R Lets you adjust the balance between the front left and right speakers. • The balance can be adjusted ±8.0 dB in 0.5 dB steps. Rear speaker balance Initial setting is : REAR L ___1___ R Lets you adjust the balance between the rear left and right speakers. • The balance can be adjusted ±8.0 dB in 0.5 dB steps. Rear speaker level Initial setting is : REAR LEVEL 0 dB Lets you adjust level of the rear (left and right) speakers. • The level can be adjusted in 0.5 dB steps from –20.0 dB to +10.0 dB. • Selecting MUTE completely mutes the sound (–.) from the rear speakers. In this case, the sound of the rear channels is not output from the front speakers, etc. (continued) 15GB Processor Operations Processor Operations Centre speaker level Initial setting is : CENT.LEVEL 0 dB Lets you adjust the level of the centre speaker. • The level can be adjusted in 0.5 dB steps from –20.0 dB to +10.0 dB. • Selecting MUTE completely mutes the sound (–.) from the centre speaker. In this case, the sound of the centre channel is not output from the front speakers, etc. Sub woofer level Initial setting is : SUB WOOFER 0 dB Lets you adjust the level of the sub woofer. • The level can be adjusted in 0.5 dB steps from –20.0 dB to +10.0 dB. • Selecting MUTE mutes the sound from the sub woofer. SURROUND menu The SURROUND menu contains parameters that let you customize various aspects of the current surround field. The settings available in this menu are stored separately for each surround field. The parameter types vary according to the menu mode. Surround effect level (Digital Cinema Sound modes only) Initial setting is : SURR.EFFECT 100% This parameter can be adjusted directly using EFFECT +/– on the remote. It lets you adjust the “presence” of the current digital cinema sound surround effect. • The effect level can be adjusted from 0% (no digital cinema sound effects) to 100% (150%) in 5% steps. Low Frequency Effect (LFE) mix level (DISCRETE only) Initial setting is : LFE MIX. 0dB This parameter lets you attenuate the level of the LFE (Low Frequency Effect) channel output from the sub woofer without effecting the level of the bass frequencies sent to the sub woofer from the front, centre or rear channels via the bass redirection circuitry. • The level can be adjusted in 0.5 dB steps from –20.0 dB to 0 dB (line level). 0 dB outputs the full LFE signal at the mix level determined by the recording engineer. • Selecting MUTE mutes the sound of the LFE channel from the sub woofer. However, the low frequency sounds of the front, centre, or rear speakers are output from the sub woofer according to the settings made for each speaker in the speaker setup (page 8). Dynamic range compression ratio Ini...

Herunterladen

Geben Sie zwei Ziffern: