Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Crate Amplifiers Dateigröße: 727.79 kb Dateiname: Unterrichtssprache:

To save a new DSP preset to a channel, first make the desired DSP changes. Then press and hold the Save/Tap button for about three seconds. The Save/Tap LED will flash through three quick sequences, indicating the preset was saved. The new preset is stored for that channel and will remain in memory until a new preset is stored for that channel or the factory presets are restored. We recommend making copies of page 14 of this guide for the purpose of writing down your own presets. REVERBREVERB SAVE / TAPSAVE / TAP MULTIMULTI CHORUSCHORUS FLANGEFLANGE PHASERPHASER VIBVIB OO TT RR DELAYDELAY EFXEFX ECHOECHO SINGLESINGLE TAPETAPE DSPDSP REVERBREVERB SAVE / TASAVE / TA MULTIMULTI CHORUSCHORUS FLANGEFLANGE PHASERPHASER VIBVIB OO TT RR DELAYDELAY EFXEFX ECHOECHO SINGLESINGLE TAPETAPE DSPDSP REVERBREVERB SAVE / TAPSAVE / TAP MULTIMULTI CHORUSCHORUS FLANGEFLANGE PHASERPHASER VIBVIB OO TT RR DELAYDELAY EFXEFX ECHOECHO SINGLESINGLE TAPETAPE DSPDSP 3 SECONDS CHANGES ARE SAVED AS NEW PRESET Restoring the Factory Presets: The factory assigned DSP presets may be restored, erasing any changes you have made. Turn the amplifier off. Press and hold the Save/Tap button as you turn the amplifier on. The Save/Tap LED will flash through two quick sequences, indicating the factory presets have been restored. More About the Save/Tap Button: The Save/Tap button is used to set the tempo of an effect by pressing it twice within a one second time frame. The time between the two taps sets the timing of the effect. If the Save/tap button is pressed an odd number of times (once, three times, etc.), the timing will default to the maximum one second time period. The Multi effects and the Delay effects may each have a different tap speed. The default “target” for the Save/Tap button is the Delay control. To select the Multi control as the tap button’s target, rotate the Multi control. The Save/Tap tempo function will automatically revert back to the Delay control 16 seconds after the Multi control is rotated, or when the tap speed was last changed for the Multi effect. NOTE: In most cases, it is usually more pleasing to the ear to set a slower tap speed for the HI effects and a faster tap speed for the LO effects. Guitar Amplifier Using the Footswitch for More Presets: The Crate three-button footswitch supplied with the RFX65 allows access to an additional DSP preset for each channel of the amplifier. When the footswitch is connected to the amplifier as shown below, the “original” DSP presets are active for each channel when the #3 footswitch LED is illuminated. These are referred to as “DSP Bank ‘A’.” When the #3 button is switched and the LED is out, a second DSP preset may be stored and recalled for each channel - “DSP Bank ‘B’.” NOTE: DSP Bank “B” presets are only accessible when the footswitch is connected to the amplifier. When the footswitch is not connected, only DSP B...

Herunterladen

Geben Sie zwei Ziffern: