Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
PS-540. 32 4038 39 37 36 44 45 43 42 41 33 34 35 20 21 22 23 30 31 24 25 26 27 18 17 16 14 15 48 29 46 Page 2 PS-540. Page 3 located on the rear panel. The stereo line inputs will accept any line INTRODUCTION level input such as a CD player, a cassette player, etc. Congratulations on purchasing the Gemini PS540i mixer. This state of . The phono inputs will accept only turntables with a magnetic cartridge. the art mixer includes the latest features and is backed by a three year limited warranty, excluding crossfader and channel slides. Prior to use, 6. Headphones can be plugged into the front panel mounted we suggest that you carefully read all the instructions. HEADPHONE (47) jack. FEATURES THE GROUND LIFT SWITCH 2 Stereo channels D D epending on your system configuration, applying the ground sometimes creates a quieter signal path. Sometimes “lifting” the 2 Phono/Line Convertible, 1 Phono, 1 Line and 1 Mic input ground eliminates loops and hum to create a quieter signal path. 1/4" DJ Mic jack 1. Listen to the system with the unit ON, without music, and with the Low, Mid, High and Gain controls on each channel ground “applied”. GROUND LIFT SWITCH (13) should be set to the left. Balanced and unbalanced Master Outputs 2. Turn power OFF before moving the GROUND LIFT SWITCH. Master output control 3. Now, “lift” the ground by moving the GROUND LIFT SWITCH to the Cue section right. Turn the power back ON and listen to determine which position provides a signal free of background noise and hum. CAUTIONS Note: Keep GROUND LIFT in the ground “applied” or left 1. All operating instructions should be read before using this equipment. position if noise level remains the same in either position. 2. To reduce the risk of electrical shock , do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to CAUTION: DO NOT TERMINATE THE AC GROUND ON THE POWER qualified Gemini Sound Products service technicion. hCABLE. TERMINATION OF THE AC GROUND CAN BE HAZARDOUS. In the USA: If you experience problems with this unit, please call 1 (732) 969-9000 for Gemini Customer Service. Do not attempt to return this equipment to your dealer. 3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES. CONNECTIONS 1. Before plugging in the power cord, make sure that the VOLTAGE SELECTOR (2) switch is set to the correct voltage. . F NOTE: This product is double insulated and is not intended to be grounded. 2. Make sure that the POWER (1) switch is in the OFF position. 3. The PS-540i is supplied with 3 sets of output jacks. The OUTPUT AMP (3) jacks are used to connect to your main amplifier. The OUTPUT REC (5) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix. The 1/4" jack BALANCED OUTPUT (4) jacks are used to connect to your main amplifier using standard 1/4" connector cables. We recommend using balanced amp outputs if the cables to your amp are 25 feet or more. 4. The DJ MIC (28) input (found on the front panel) accepts a 1/4" connector for balanced or unbalanced microphones. 5. On the rear panel are 2 stereo PHONO/LINE (7,11) inputs, 1 stereo PHONO (12) input and 1 stereo LINE (6) input. The PHONO/LINE SWITCHES (8,10) enable you to set the (7,11) inputs to Phono or Line. The phono inputs will accept only turntables with a magnetic cartridge. A GROUND SCREW (9) to ground your turntables is OPERATION 1. POWER ON: Once you have made all the equipment connections to your mixer, press the POWER SWITCH (1). 2. CHANNEL 1: The GAIN (48), HIGH (20), MID (21), and LOW (22) controls allow you to fully adjust the selected source. Switch (23) allows you to select the PHONO 1 (12) or the PHONO 2 LINE 1 (11) input. CHANNEL SLIDE (24) controls the input level of this channel. 3. CHANNEL 2: The GAIN (41), HIGH (33), MID (34), and LOW (35) controls allow you to fully adjust the selected source. Switch (36) allows you to select the PHONO 3/LINE 2 (7) or the LINE 3 (6) input. CHANNEL SLIDE (37) controls the input level of this channel. PLEASE NOTE: There is Low, Mid and High equalization for each channel with an extremely wide range of adjustment. SUGGESTION: You can use the Cut Features on each channel to remove Low, Mid and/or High range to create special effects. 4. KILLING FREQUENCIES: There are two ways to kill frequencies, using the LOW (25, 38) ,MID (26, 39), and HIGH (27, 40) KILL SWITCHES. Each Kill Switch has three positions, latch, normal and flash. When you move the selected KILL SWITCH to the top LATCH (ON) position, the switch will stay there, and the frequency will be...