Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
The ASSIGN (29) switch has 5 settings (OFF, 1, 2, 3 or 4) and allows you to select channel 1, 2, 3 or 4 to play through the right side of the crossfader. With the ASSIGN switch in the off position, that side of the crossfader will be inactive. The CROSSFADER (28) in your unit is removable and if the need arises can be easily replaced. Crossfader units are available in three varieties. Part Page 3 # RF-45 (which is identical to the crossfader supplied with the mixer) has a 45 mm travel from side to side. Part # RF-30 is available with a 30 mm travel distance. Also available is the PSF-45 with a special curve designed for scratch mixing. Just purchase one of these crossfader units from your Gemini dealer and follow these instructions: 1. Unscrew the outside FADER PLATE SCREWS (B). Do not touch the INSIDE SCREWS (C). 2. Carefully lift the fader and unplug the CABLE (D). 3. Plug the new fader into the cable and place it back in the mixer. Specifications Screw the fader to the mixer. b c | C B O O C 7 OUTPUT CONTROL SECTION: The level of the AMP OUT (37, 49) is controlled by the MASTER (34) slide and the BALANCE CONTROL (33). The BOOTH (35) control adjusts the level of the BOOTH OUTPUT (38). HINT: The booth OUTPUT is used by some DJs to run monitor speakers in their DJ booth. You can also use it as a second ZONE or AMP output. Activating the MONO (32) button (the mono LED will light) makes the master output mono. 8. TALKOVER SECTION: The purpose of the talkover section is to allow the program playing to be muted so that the mic can be heard above the music. The MIC/TALKOVER SWITCH (9) controls MIC 1 and MIC 2 and has three settings. When the MIC/TALKOVER SWITCH (9) is in the left position, MIC 1 and MIC 2 and talkover are off. When the MIC/TALKOVER SWITCH (9) is in the center position MIC 1 and MIC 2 are on, the MIC INDICATOR (8) will glow, but talkover is off. When the MIC/TALKOVER SWITCH (9) is in the right position, MIC 1 and MIC 2 and talkover will be on and the volume of all sources except the Mic inputs are lowered by 16 dB. The TREBLE (4) and BASS (5) controls allow you to fully adjust the tone of MIC 1 and MIC 2. MIC 1 LEVEL (7) controls the level of MIC 1. The MIC 2 LEVEL (6) controls the level of MIC 2. 9. CUE SECTION: By connecting a set of headphones to the HEADPHONE (13) jack, you can monitor any or all of the channels. Press the CUE ASSIGN (20) buttons for channels 1 - 4 to select the channel or channels to be monitored and their respective LED indicators will glow. Use the CUE LEVEL (10) control to adjust the cue volume without effecting the overall mix. By rotating the CUE PGM PAN (12) control to the left you will be able to monitor the assigned cue signal. Rotating to the right will monitor the PGM (program) output. Use the CUE SPLIT (11) button to split the signals from cue and program so that cue will be heard in one earphone and program will be heard in the other earphone. 10 DISPLAYS: The PEAK HOLD LED METER (30) indicates the MASTER OUTPUT (37, 49) left and right channel levels. The individual channels each have their own PREFADER INPUT LEVEL PEAK HOLD LED METERS (31) which reflect the GAIN (14), HIGH (15), MID (16), and LOW (17) rotary control adjustments. The CHANNNEL SLIDES (19, 22, 24, 26) will not effect the PREFADER INPUT LEVEL PEAK HOLD LED METERS (31). INPUTS: Phono.........................................................................3mV 47Kohm Line.......................................................................150 mV 27Kohm Aux.......................................................................150 mV 27Kohm OUTPUTS: Amp/Booth......................................................0 dB 1V 400ohm Max..............................20V Peak to Peak Rec...........................................................................225mV 5Kohm MIC 1 & MIC 2: DJ Mic....................................................1.5mV 2Kohm balanced Bass......................................................................................± 12dB High.......................................................................................± 12dB MIC 3: DJ Mic....................................................1.5mV 2Kohm balanced Controls...........................................................................Channel 4 GENERAL: Bass (Chnls 1-4).......................................................+ 12dB/- 26 dB Mid (Chnls 1-4)..........................................................+ 12dB/- 26 dB Treble (Chnls 1-4).....................................................+ 12dB/- 26 dB Gain (Chnls 1-4)..............................................................0 to -20dB Frequency Response....................................20Hz - 20KHz +/- 2dB Distortion................................................................................0.02% S/N Ratio...............................................................better than 80dB Talkover Attenuation..................
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - CDM-1000 (2.19 mb)