Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
VORSICHT: Risiko -Elektrischer Schlag! Nicht (iffnen! VORSICHT: Urn das Risiko eines elektrischen Schlages zu vermeiden, nicht die Abdeckung enfernen. Es befinden sich keine Teile darin, die vom Anwender repariert werden konnten. Reparaturen nur von qualifiziertem Fachpersonal durchfiihren lassen. ACHTUNG: Urn einen elektrischen Schlag oder Feuergefahr zu vermeiden, sollte dieses Gerat nicht dem Regen oder Feuchtigkeit ausgesetzt werden. Vor Inbetriebnahme unbedingt die Bedienungsanleitung lesen. 2 Congratulations on your purchase of the all new ExpressTM 112 TransTubeTM Series. This amp represents years of research on vacuum tube emulation, resulting in a totally new Express. The preamp has been redesigned, using patent-applied for technology that redefines tubelike distortion and harmonic generation in solid-state amps. The new T. Dynamics circuitry, also awaiting several patents, creates the long sought for tube power compression phenomenon. This, when combined with the preamp circuitry, yields the closest tube amp simulation to date. The compression effect is increased by turning the T. Dynamics control down, which lowers the power level the amp puts out. To further enhance the performance of the Express, an added external speaker jack is included. The speaker has been upgraded to a Sheffield, and an effects loop is included to allow for greater flexibility. -INPUTS II I HIGH GAIN INPUT (1) Used for most electric guitars. It is 6 dB louder than Low Gain input. LOW GAIN INPUT (2) Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain). VOLUME (3) Controls the volume level of the Clean channel. BRIGHT SWITCH (4) Provides a preset boost (6 dB) to treble frequencies. To activate, depress the switch to its “in” position. CHANNEL SELECT SWITCH (5) Allows selection of the Lead or Clean channel. The “in” position of the switch selects the Lead channel and the “out” position selects Clean. NOTE: Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the channel switch must be in the “in” (Lead) position. LOW, MID, & HIGH EQ (6) Passive tone controls that regulate the low, mid, and high frequencies, respectively. PRE GAIN (7) Controls the input volume level of the Lead channel. THRASH SWITCH (8) Notches the mid range about 20 dB. 3 GAIN SWITCH (9) Boosts the overall system gain. Depress to the “in” position to activate. LOW, MID, & HIGH EQ (10) Passive tone controls that regulate the low, mid, and high frequencies, respectively. POST GAIN (11) Controls the overall volume level of the Lead channel. The final level adjustment should be made after the desired sound has been achieved. REVERB LEVEL (12) Controls the overall reverb level. EFFECTS SEND (13) Output for supplying signals to external low-level effects or signal processing equipment. EFFECTS RETURN...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - Express 112 S (1.29 mb)