Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Page Features ..................................................... Construction............................................... Body..................................................... Neck .............................r..................... Pickup ................................................. Bridge................................................... Battery.................................................. Controls ..................................................... Vo I u me................................................. Tone Network ....................................... Output Jack .......................................... Ad j ustments................................................ Torsion Rod........................................... Pickups................................................ String Intonation................................... Neck Tilt.............................................. Saddle Height...................................... Care......................................................... Temperature & Humidity....................... Strings................................................. Finish.................................................. Accessories.......................................... Warn i ngs Warranty 2 Introduction Thank you for buying the Peavey G-Bass™. This bass was built by the most skilled craftsmen and made from the finest materials available. As with all of our musical equipment, we have built our bass guitars using a combination of leading-edge technology and traditional handcrafted methods. Ask your Peavey dealer for a full list of other Peavey musical equipment and accessories. Features Solid basswood body 35" scale, carbon/graphite composite neck (adjustable) Pau Ferro fingerboard, 8" radius 21 nickel/silver frets 1 .5" topnut width Graphlon™ topnut Active bass, mid & treble boost/cut, 10 dB Master volume control Chrome-plated, die-cast bridge Extra deep forearm and ribcage contour for maximum comfort 1-VFL™ Plus, wide aperture, internally active pickup Construction Body The body of this instrument is constructed from the finest basswood. The deep, double cutaway design provides unimpeded access to the highest fret while the extended upper horn balances the instrument, thereby avoiding the need to support the instrument with the left hand. The instrument features our polyester/urethane finish which is mar- and weather-resistant. Neck The carbon/graphite composite neck is crafted to provide unmatched rigidity and freedom from warpage. Additional reinforcement is provided with a steel torsion rod. (See Adjustment-Torsion Rod for adjustment instructions.) Pickup The wide aperture, VFL Plus™ humbucking pickup provides high output and wide frequency response. The pickup has been harmonically placed on the instrument allowing greater harmonic and fundamental response to be obtained from each string. The sensitivity level of the pickup can be adjusted by raising or lowering the pickup with its height-adjustment screws. Raising the pickup closer to the strings will increase sensitivity and lowering the pickup (away from the strings) will decrease the sensitivity. Bridge The bridge of this instrument is constructed from heavily plated die-cast metal and is securely bolted to the body at five points. The four barrel-type string saddles are made from heavy-duty steel for maximum sustain and string stability and are fully adjustable for string height, tilt, and intonation/ compensation. (See Adjustments : Height and Intonation for instructions.) Battery The preamp is powered by two 9-volt batteries (not included), which are accessible by removing the battery cover plate from the back of the i nstru ment. NOTE: Heavy-duty or alkaline batteries are recommended for reliability and longest battery life. Low battery voltage will result in "fuzzy" or distorted sound, especially with higher tone and volume settings. Controls Volume The volume knob controls the total signal level delivered from the magnetic pickup to the output jack. Tone: Network The tone network utilized is an active three-band circuit. The low and high controls are shelving type equalization. The mid control is a peaking type. 5 When the controls are at the center position, the response of the preamp is flat. Rotating the high control clockwise will boost frequencies above 2 kHz 10dB. Rotating the low control clockwise will boost frequencies below 100 Hz 10dB. Rotating the mid control clockwise will boost the band of frequencies from 200 Hz to 800 Hz (centered @ 400 Hz) 10dB. Rotating any of the controls counterclockwise will cut those same frequencies by 10 dB. Output Jack The output jack is a genuine Switchcraft®* 1/4" phone jack which accepts standard guitar patch cables. (We recommend high-quality Peavey shielded patch cords.) *Switchcraft® is a registered trademark of Switchcraft, Inc. Ad j u stm ents Your instrument has bee...