Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Vox Dateigröße: 1.48 mb Dateiname: VT20_40_80_120Plus_OM_E2.pdf Unterrichtssprache:

This setting will change the amount of the Valve Reactor’s distortion. NOTE: The MASTER volume setting is not programmed. NOTE: The amount of Valve Reactor distortion is also affected by the GAIN control and VOLUME control. For some settings, there will be almost no distortion. AMP switch 4. 4. Use the BANK switch to select the channel bank. In Channel Select mode, the BANK LED will be lit green or red. Use the CHANNEL BANK switch CHANNEL switch TUNER (BYPASS) switch switches to select channels. The LED of the selected channel will be lit up. To save a new program, hold down the desired CHANNEL switch for two seconds or longer. If you want to save a new program in a different bank, hold down the BANK switch for 0.5 seconds or longer (until the BANK LED starts blinking) and select the desired writing-destination bank (p. 15 “Saving a program”). When the tuner function is turned on, the BANK and CH 1–4 LEDs will indicate the string number (a pitch note closest to the input sound) (p. 18 “Using the tuner”). TUNER (BYPASS) switch and LED Pressing the TUNER (BYPASS) switch will turn all effects off (bypass), and engage the tuner function. If you want to tune your instrument with the amp output muted, press the TUNER (BYPASS) switch for one second or longer. When the tuner function is turned on, the TUNER (BYPASS) LEDs will display the tuning status (p. 18 “Using the tuner”). 5. PEDAL section Here you can adjust the settings for pedal effects. For details on each effect, refer to “Pedal effects” (p. 26). PEDAL selector This selects the effect type. When you switch the effect type, the parameter settings of the effect will be initialized. VALUE knob This adjusts the parameters of each effect. To turn the pedal effect off, rotate this knob all the way to the left. TUNER (BYPASS) LEDs BANK LED CHANNEL LED PEDAL selector VALUE knob 6. MODULATION/DELAY section Here you can adjust the settings for modulation effects, delay effects, and other effects, such as pitch shift. For details on each effect, refer to “Modulation and delay effects” (p. 28). MOD/DELAY selector TAP LED DEPTH knob TAP switch MOD/DELAY selector This selects the modulation type, delay type, or other effect type. When you switch the effect type, the parameter settings of the effect will be initialized. DEPTH knob This adjusts the parameter of each effect, such as the depth of the effect. You can also adjust the modulation speed and other parameters by holding down the TAP switch and rotating the DEPTH knob. To turn the modulation/delay effect off, rotate this knob all the way to the left. TAP switch, LED This sets the speed of modulation-type effects, or the delay time of delay effects. The interval between two presses of the switch will be set as the speed or time. The LED will blink at intervals of the specified speed or time. HINT: To set a precise speed or time that matches the tempo of a song, press the TAP switch several times in rhythm with the song. If you selected PITCH SHIFT, pressing the TAP switch repeatedly will change the pitch setting. If you selected FILTRON, pressing the TAP switch repeatedly will toggle between UP and DOWN for the envelope. When UP is selected, the TAP LED will light up. You can also adjust the speed, pitch, or other parameters by holding down the TAP switch and rotating the DEPTH knob. For details, please refer to “Modulation and delay effects” (p. 28). MOD/DELAY selector This selects the modulation type, delay type, or other effect type. When you switch the effect type, the parameter settings of the effect will be initialized. DEPTH knob This adjusts the parameter of each effect, such as the depth of the effect. You can also adjust the modulation speed and other parameters by holding down the TAP switch and rotating the DEPTH knob. To turn the modulation/delay effect off, rotate this knob all the way to the left. TAP switch, LED This sets the speed of modulation-type effects, or the delay time of delay effects. The interval between two presses of the switch will be set as the speed or time. The LED will blink at intervals of the specified speed or time. HINT: To set a precise speed or time that matches the tempo of a song, press the TAP switch several times in rhythm with the song. If you selected PITCH SHIFT, pressing the TAP switch repeatedly will change the pitch setting. If you selected FILTRON, pressing the TAP switch repeatedly will toggle between UP and DOWN for the envelope. When UP is selected, the TAP LED will light up. You can also adjust the speed, pitch, or other parameters by holding down the TAP switch and rotating the DEPTH knob. For details, please refer to “Modulation and delay effects” (p. 28). REVERB knob REVERB section Here you can adjust the settings for reverb effects. For details on each effect, refer to “Reverb effects” (p. 31). REVERB knob Depending on the position of the knob, this selects the reverb type (ROOM, SPRING, or HALL) or adjusts the mix amount of the reverb sound. If you turn th...

Herunterladen

Geben Sie zwei Ziffern: