Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
If this occurs, turn the threshold knob back toward the left until the tonal change is not noticeable. * If you want to turn the circuit itself completely off, set the rear panel compressor/limiter type switch (22) to the OFF (BYPASS) position. 5. Peak indicator This indicates the input signal level. Use the input sensitivity knob (2) for each input jack to adjust the input level so that the peak indicator does not light. If the rear panel compressor/limiter type switch (22) is set to OFF (BYPASS) position, the peak indicator will light red. The compressor/limiter type switch is set to compressor 1, 2 or Limiter position, the peak indicator will light green. 6. Digital input switch If you want to record from the digital input, turn this ON (pressed inward ). This allows you to synchronize with the external digital device connected to the digital input connector (17). Digital input switch Status ON with a digital device connected to the digital input connector The input from the digital input connector (17) is sent to the computer (Digital input mode). OFF The input from the combo input jacks (1) is sent to the computer. ON with no digital device connected to the digital input connector The audio signal (sound) that is output from the computer via USB will pass through the UA-25EX and return to the computer (LoopBack mode). *In digital input mode you will not hear the sound from the computer. The settings of the direct monitor section will be ignored. This means that the direct monitor switch (9), STEREO/MONO select switch (8), and direct monitor volume (10) will not do anything. Panel Descriptions Panel Descriptions . USB indicator This will light blue if the UA-25EX is connected to your computer via the USB cable and the computer has correctly recognized the UA-25EX. 8. STEREO/MONO select switch (direct monitor section) This selects whether the input signal from the combo input jacks (1) will be monitored in stereo (STEREO) or in monaural (MONO). If you’ve connected a guitar only to INPUT 2/R, set this to monaural ( pressed inward). Even if this is set to monaural, the audio signal sent via USB to your computer will be stereo. *If the digital input switch (6) is on, operating the STEREO/MONO select switch will not do anything. 9. Direct monitor switch (direct monitor section) This selects whether the input signal from the combo input jacks (1) will be output from the headphone jack (13) and master output jacks (14). The direct monitor ON and OFF will change whenever this switch is pushed. The direct monitor ON/OFF status can be controlled directly from ASIO 2.0 compatible software such as Cubase. Direct monitor switch Status ON (direct monitor indicator lit) The input signal will be output. OFF (direct monitor indicator unlit) The input signal will not be output. Use the OFF setting if the audio signal is being passed “through” within the computer, or if you’ve connected a mixer and are monitoring the input signal directly from the mixer’s output. *In digital input mode (p. 11), direct monitor is always ON, regardless of the direct monitor switch operation. 10. Direct monitor volume (direct monitor section) knob This adjusts the volume at which the input signal from the combo input jacks (1) is output from the headphone jack (13) and master output jacks (14). If this is turned all the way to the right, the monitored sound will be twice volume (+6 dB). 11. Direct monitor indicator (direct monitor section) This will light when direct monitor is on, and will be unlit when it is OFF. If the digital input switch (6) is turned on, direct monitor will be OFF automatically and the direct monitor indicator will be extinguished. 12. Output volume knob This adjusts the volume that is output from the headphone jack (13) and master output jacks (14). 13. Headphone jack Accepts connection of headphones. This jack will output the same sound as the master output jacks (14). Sound will be output from the master output jacks even if headphones are connected. Panel Descriptions Rear panel Panel Descriptions Rear panel 15 1922 141617 18 20 2123 14. Master output jacks (TRS balanced type, RCA phono type) These are output jacks for analog audio signals. The phone jacks and RCA phono jacks output the same signal. You may use whichever type of jack is appropriate for the connected device or the type of cable. * The TRS balanced master output jacks are wired as GND (SLEEVE) shown on the right. Before you make connections, check HOT (TIP) the wiring of the equipment you’re connecting. COLD (RING) 15. Ground lift switch Normally, you can leave this in the NORMAL (NOR) position. If you experience noise due to a ground loop, you may be able to Mater output jack (TRS balanced type) eliminate the noise by setting this to the LIFT position, so that the NOR sleeve (SLEEVE) pin of the master output TRS balanced jacks is LIFT disconnected from ground. 16. Digital output connector (optical) This is an output connector for digital audio signa...