Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Value: 40–260 3. To turn off the metronome, press the [ ] button to turn it off. Even without pressing the [ ] button, you can change the tempo by turning the [-/+] dial in the Drum Kit screen. You can change the way that the metronome sounds (p. 34). Quick Recording and Playback (QUICK REC) The TD-4 provides a Quick Rec function that lets you easily record your own performance. This is a very useful practice tool, recording and then checking your drumming. Whenever you turn on the power, the TD-4 is prepared for the playback of its demo patterns. After you’ve made a recording, if you turn off the power, the data for the recording will be erased. Then, the next time the power is switched on, the demo patterns will once again be loaded in from internal memory. A signal input via the MIX IN jack won’t be recorded. Recording 1, 3 * First: Please select the drum kit that you want to use for recording. 1. Press the [ ] (Rec) button. The [ ] (Rec) button will blink, and the TD-4 will enter recording-standby mode. English Deutsch Francais Italiano Espanol Portugues Nederlands • To record along with the metronome, press the [ ] button to turn the metronome on, and use the [-/+] dial to adjust the tempo. 17 Practicing Practicing The following screen appears. To stop recording, press the [ 3. ] (Rec) button and the button goes dark. * If you exceed the maximum recording time, recording stops automatically. Playback 1, 2 1. Press the [ ] (Play/Stop) button so it’s lit. The following screen appears, and playback begins. * The recorded performance data is not transmitted from MIDI OUT. By holding down the [ ] (Play/Stop) button for about one second, you can select loop playback; the recorded performance will play repeatedly. 2. To stop playback, press the [ ] (Play/Stop) button and the button goes dark. When playback has finished, the [ ] (Play/Stop) button automatically goes dark. Using Time Check to Check Your Recorded Performance You can use Coach mode’s “TIME CHECK” function to check whether your recorded performance was played with accurate timing. You must play along with the metronome when recording. 1. Press the [ ] (Play/Stop) button so it’s lit; the recorded performance will play. 2. Press the [COACH] button. The following screen appears. During playback, you can change the playback tempo by turning the [-/+] dial. When you stop playback, the tempo will revert to the setting at which it was recorded. * Loop playback will automatically be selected and the metronome will turn on. 3. To stop playback, press the [ ] (Play/Stop) button and the button goes dark. Loop Playback 19 Practicing English Deutsch Francais Italiano Espanol Portugues Nederlands The TD-4’s Coach mode is a unique set of exercises specifically designed to help build speed, accuracy and stamina, as well as develop better timing skills. Throughout the Coach modes, you will discover that some of them have programmable parameters, allowing you to adapt the functions to your specific needs. fig.P-CoachMenu.eps 1. Press the [COACH] button so it’s lit. The Coach mode menu screen will appear. fig.d-Tr-Menu-1.eps 2. Use the SEL [ ] [ ] buttons to select the desired practice menu item (shown at right). 3. When you’ve selected a practice menu item, press the [OK] button. You’ll proceed to the start screen of the selected practice menu item. Or you can just press the [ ] button to immediately start practicing without calling up the start screen. In the start screen of the Practice menu, you can press the [MENU] button and make settings for each menu item. Practicing in Coach Mode Selecting a Practice Menu 1 2 3 Menu Explanation Warm Ups p. 20 When you want to get warmed up before you begin practicing. Time Check p. 22 Strengthens your ability to play accurate rhythms. Tempo Check p. 23 Strengthens your ability to play at a consistent speed. Quiet Count p. 24 Strengthens your ability to maintain the tempo internally. Auto Up/Down p. 26 Strengthens your endurance. 20 Practicing In this mode you’ll successively practice steps 1–3, be graded on your performance at each step, and then receive a final evaluation. You can choose one of three courses, ranging from easy to difficult. You can also adjust the tempo according to your level of skill. Start practicing fig.WarmUp-1.eps In the WARM UPS start screen, press the [ ] button to start practicing. After you’ve started WARM UPS, you can press the [ ] button to pause the WARM UPS. fig.WarmUp-6.eps To resume practicing, press the [ ] button once again. If you’re finished with WARM UPS, press the [OK] button. Here you can press the SEL [ ] button to move to the previous step, or press the SEL [ ] button to move to the next step. You can turn the [-/+] dial to adjust the tempo even while practicing. Step 1: Change-up In this step, the rhythm type will change every two measures. Starting from half notes, the note values will gradually become shorter, and will then return to half notes; this change in rhythms will be re...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - TD-4SX (14.34 mb)