Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
2 Panel.Descriptions. 4 About.Batteries. 6 Basic Operation 7 Before.You.Start. 8 Connecting the SP-404SX to Your Speakers 8 Turning the Power On 9 Inserting an SD card 10 Playing.Sounds. 11 Playing Samples 11 Applying Effects 13 Playing Patterns 14 Adjusting the Tempo 15 Recording.Samples—.Basic.Operation. 16 STEP 1: Connecting Equipment 16 STEP 2: Sampling 18 Deleting a Sample 21 Importing.Wave.Files.from.Your.Computer. 22 Advanced Operation 23 Playing.an.External.Input.Sound. 24 Adjusting the Volume of the EXT SOURCE 24 Recording.Samples—.Advanced.Operation.25 About the Available Sampling Times 25 Specifying the Type of Data to Create when Sampling 25 Starting Sampling Automatically (Auto Sampling) 25 Sampling with a Specified Tempo 26 Using a Count-in 26 Resampling 26 Editing.a.Sample. 27 Setting a Sample’s Volume 27 Adjusting the Playback Region of a Sample 27 Deleting an Unwanted Portion (Truncate) 29 Changing a Sample’s BPM 30 Changing the Length of a Sample without Changing the Pitch (Time Modify) 30 Deleting All Samples 30 Exchanging Samples between Two Pads 31 Copying a Sample to Another Pad 31 Pattern.Sequencer. 32 Recording a Pattern 32 Deleting a Pattern 34 Deleting All Patterns 34 Exchanging the Patterns of Two Pads 34 Copying a Pattern to Another Pad 34 About.SD.Card. 35 Formatting an SD card 35 Exporting WAVE Files 35 Importing WAVE Files 36 Saving Backup Data (Backup Save) 37 Loading Backup Data (Backup Load) 37 Deleting Backup Data (Backup Delete) 37 About the Protect Function 38 Other.Functions. 39 List of Functions 39 Adjusting the Input Gain 39 Adjusting the Output Gain 39 Restoring the Factory Settings (Factory Reset) 40 Display Illumination and Sleep Settings 40 Checking the Version Number 40 Appendix 41 Effect.List. 42 Effect Limit Mode 42 Error.Message.List. 45 Troubleshooting. 45 About.MIDI. 47 MIDI Implementation Chart 48 Specifications. 49 Index. 50 USING.THE.UNIT.SAFELY. 51 IMPORTANT.NOTES. 52 10 11 12 13 14 15 10 11 12 13 14 15 s Name Description Page 1 [VOLUME].knob This adjusts the volume p .9 These knobs control effect parameters You can also use each knob to make the following settings p .13 CTRL.1 The starting location of a sample The playback time of a sample p .29 p .30 2 [CTRL.1]–[CTRL.3].knobs CTRL.2 The BPM (tempo) of the pattern The ending location of a sample p .15 p .28 The type of MFX p .13 CTRL.3/MFX The sampling level p .19 The volume of the sample p .27 3 PEAK.indicator Indicates the analog input level of the LINE IN jacks Adjust the volume of your connected equipment so that this indicator lights occasionally p .19 4 Eff.ect.buttons Use these buttons to select the effect you want to use p .13 5 Display Display.illumination This shows information such as the BPM (tempo), the values of various settings, and error messages (p 45) This will blink in synchronization with the pattern’s tempo During sampling, this will light red if the level of the audio signal is excessive p .40 p .19 [PATTERN.SELECT].button Press this when you want to play or record a pattern p .14 6 [LENGTH].button Specifies the length of the pattern when recording a pattern p .32 [QUANTIZE].button Specifies quantization (automatic timing correction) when recording a pattern p .32 [DEL].button Deletes a sample or pattern p .21 [REC].button Starts/stops sampling or pattern recording p .18 [RESAMPLE].button Applies an effect to the sound of a sample and resamples the result p .26 Cancels an operation such as sampling, pattern playback, or recording 7 [CANCEL].button By pressing this button four times in rapid succession, you can stop all sounds that are currently playing p .12 Makes the display indicate the remaining time available for sampling p .25 [REMAIN].button In addition, you can hold down this button and press a pad to specify the sample to which you want to apply an effect, or to specify the sample whose settings you want to edit (modify p .13 current pad) [MARK].button Use this button when you want to play only a portion of a sampled sound p .27 1 2 3 4 5 6 7 8 9 Name Description Page Name Description Page Pads.[1]–[12] When you press these pads, you’ll hear the samples that are assigned to the pads If the [PATTERN SELECT] button is lit, the pads will select patterns p .11 p .14 [START/END/LEVEL].button Use this button when you want to change the playback start/end points of a sample or to adjust its volume p .27 9 [TIME/BPM].button Use this button when you want to specify a sample’s playback time or BPM (tempo) p .15 You can change the tempo by pressing this button several times at the desired timing p .15 [TAP.TEMPO].button To temporarily stop the production of sound, hold down the [FUNC] button while you press p .12 the [TAP TEMPO] (PAUSE) button [LO-FI].button Switches the sample’s playback quality (standard/lo-fi) p .12 [STEREO].button Specifies whether you’ll be sampling in monaural or in stereo p .18 Switches between Gate playback (the sample will play only while you hold down the pa...