Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
[PLATTER/SCRATCH disc] u The playing speed changes when the PLATTER/SCRATCH disc is turned with the platter disc mode set to “SEARCH/BEND” using the PLATTER SOURCE button. 6 Deck1 display Deck2 display Switching the display .1 The display switches between the single and dual modes when the DISPLAY MODE button is pressed. • The operable track does not switch. 1-2 Single display mode Dual display mode Pitch decreases Pitch increases d c d c 23 ENGLISH ENGLISH 15 MIRROR MIX Starting mirror mix playback r With the Deck 1 set to Cue or Play mode, press the Function3 button to start mirror mix playback. Setting the mirror mix playback parameters e While in the mirror mix mode. The Deck 2 delay time can now be set with the PARAMETERS knob. • When the MIRROR MIX button is pressed again, the delay time setting mode turns off. Selecting the mirror mix mode w Press the MIRROR MIX button and hold it in for over 1 second to set the mirror mix mode. Setting the BPM q Use auto BPM, TAP or BPM INPUT to set the BPM during playback of the main track. DECK1:ORANGE DECK2:GREEN NEXT FILE B LOCK AUTO/INPUT BPM FAST SEARTCH MEMO PRESET DECK1/2 HOT LIST ADD OMIT MIRROR q r,t w,e,y DIGITAL (PC/MIDI) DECK1 DECK2 LINE OUT DIGITAL (PC/MIDI) DECK1 DECK2 LINE OUT DIGITAL (PC/MIDI) DECK1 DECK2 LINE OUT DIGITAL (PC/MIDI) DECK1 DECK2 LINE OUT qw e 1 3 2 • “Mirror mix” is an effect function by which the Deck 1 and Deck 1 are played with the a track delayed by a specific amount of time (1/8, 1/4, 3/4, 1/2, 1/1 or 2/1 BPM) with respect to the main track. 4 Stopping mirror mix playback t During mirror mix playback, press the Function3 button to pause mirror mix playback. 5 Turning the mirror mix mode off y Press the MIRROR MIX button and hold it in for over 1 second to turn the mirror mix off. 6 16 D-SYNC FUNCTION This function allows two independent players to be linked together by a Cross LAN cable (Within Max. 3m) that shares and controls all your connected devices from the Master device to the Remote device. Each time the D-SYNC button is pressed, Deck 2 on the set whose D-SYNC button was pressed can be controlled from the other unit. 1. Connections Connect two units of DN-HS5500s by Cross LAN cable. DN-HS5500-A DN-HS5500-B DN-HS5500-A (Master) DN-HS5500-B (Remote) With the above connections, when the D-SYNC button on set A is pressed, set A’s Deck 2 can be controlled from set B. • The set whose D-SYNC button was pressed is called the “Master”, the other set the “Remote”. (In the case above, set A is the master, set B the remote.) • The audio signals are output from the master set. They are not output from the remote set. With the above connections The audio output (q) of Deck 1 on set A (Master) is operated from set A (Master). The audio output (w) of Deck 2 on set A (Master) is operated from set B (Remote). The audio signals (e) are not output from remote Deck 1. FADER 1 on the master side operates for the master side. FADER 2 on the master side operates for the remote side. About USB devices In the D-SYNC mode, the USB device connected to the Remote side cannot be used. LOCK ENGLISH 2. Switching to the • Switching to the D-stop mode and operation • Switching to the D-SYNC mode, etc. Example1: When Deck 1 on both Set A Set B D-SYNC DECK 1 DECK 2 DECK 1 DECK 2 Playing Stopped Stopped Stopped Switching possible Stopped Stopped Stopped Stopped Switching possible Example2: When set A is operating its own Deck 1 Set A Set B D-SYNC status DECK 1 DECK 2 DECK 1 DECK 2 Playing Stopped Stopped Stopped Switching possible Stopped Stopped Stopped Stopped Switching possible 3. Display The display is as shown below in the D-SYNC mode. Master side display Remote side display • When the D-SYNC mode is set while in the dual display mode, the display switches to the single mode. • The dual display mode cannot be set with the DISPLAY MODE button while in the D-SYNC mode. 4. Canceling the D-SYNC mode • With playback stopped on the remote side, press the D-SYNC button on the master or remote set to cancel the DSYNC mode. Example: 5. Restrictions when • Switching the operated When in the D-SYNC mode, button for either set. • Device selection It is not possible to select external • Utility mode When playback is stopped on both the TIME button on the master side and holding • Preset mode When playback is stopped on both the master sets, the preset mode can be selected MEMO button on the master side and holding it • Mirror mix mode The mirror mix mode cannot be selected. • Memo function The memo function can be set and canceled in the same way playback. Master Remote D-SYNC status Playing Stopped The D-SYNC mode is canceled. Stopped Stopped The D-SYNC mode is canceled. 24 ENGLISH ENGLISH 17 MEMO (Custom The setting information making it easy to prepare 1. About MEMO For the memo function, the data in the memo differs according q For the file playback mode • The memo data is stored in the MP3/WAV file itself, so once memo data is stored out and used when playi...