Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
2) Keep these instructions. 3) Head all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation opening(s), install in accordance with the manufacturer's instructions. 8) Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer. 10) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 11) The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 12) Before plugging DC power adaptor into the unit; please make sure the “POWER” button is off. PRECAUTIONS 1. In order to shut off the unit completely, unplug the power cord from the wall outlet, be sure to unplug the unit if you do not intend to use it for a long period of time. 2. Incorrect use of controls, adjustments and performance other than those specified herein may result in hazardous radiation exposure. 3. Should this product malfunction, discontinue use and contact a qualified service center. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION RISKS OF ELECTRIC SHOCK- DO NOT OPEN! To reduce the risk of electric shock, do not remove casing. No user serviceable parts inside. Refer servicing to qualified service personnel. The light flash with arrowhead symbol, within an equilateral triangle, is intended to alert User to the presence of “dangerous voltage” which may be of sufficient magnitude to cause electric shock to persons. The exclamation point inside an equilateral triangle is intended to alert User to the presence of important operating and maintenance (servicing) instructions in the literature that may accompany the appliance. This product may contain cheimcals listed in Proposition 65 (That may be known to cause cancer, birth defects or other reproductive harm CAUTION: To prevent shock, match wide blade of plug to wide slot, fully inserted BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock. 4. When removing the power plug from the wall outlet, pull directly on the plug, NOT the cord. 5. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, dry cloth is recommended for cleaning. 6. In order to completely turn off the unit, unplug the power cord from the wall outlet. 7. Keep this manual for future reference. PART I: Turntable Operation Turntable Part Names / Functions 1. Removable Dust Cover 2. Platter 7 .” 3. 45 rpm Adapter 4. Adjustable Tone Arm Balance 5. Tone Arm Lift Lever 6. 3 Speed (33 1/3, 45, 78 rpm) Selection 7. Auto Stop Control 8. Tone Arm Balance Rest 9. USB Jack (connect to PC or Mac) 10. RCA Output (connect to stereo / audio system) 11. AC Power Cord (connect to wall power outlet) 12. Turntable Feet 13. Magnetic (Needle) Cartridge 14. Built-in RIAA Equalizer LISTENING to a RECORD 1. Lift and remove the dust cover (1) 2. Connect the AC power cord (11) to an electrical outlet (120V~60Hz) 3. Use RCA cables to connect the RCA output (10) to your powered speaker or stereo system. Make sure the red RCA and white RCA are inserted in the red & white jacks accordingly. 4. Place a record on the turntable and select the player speed (33/45/78) (6) according to the desired record speed. NOTE: when playing a 45 rpm record, use the 45 rpm adapter (3) 5. Remove the protective cover from the needle on your cartridge (13) 6. Remove the tone arm from the rest (8), push Lift Lever backward (5) to raise the tone arm and gently move the tone arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the Lift Lever 05 forward lower the tone arm slowly onto the desired position on the record to begin playing the record. Adjust the tone arm balance if the cartridge (needle skates (slides) on your album 7. If Auto Stop Control (7) is turned ON, record will stop automatically when finished. If Auto Stop Control (7) is turned OFF, record will NOT stop automatically when finished. 8. For best performance and product maintenance, unplug the turntable when not in use. PART II: Record from Turntable to PC or Mac Audacity File:Audacity-logo-r-full-whitebg.jpg Audacity is the recording and editing software program included with your VINYLWRITER PRO turntable. You must install Audacity (or an alternative recording software) on your computer to record audio from your VINYLWRITER PRO to y...