Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Fotos und technische Daten Sony SHAKE-X3D |
Anleitung Zusammenfassung
On safety
Completely disconnect the AC power
IMPORTANT NOTICE
cord (mains lead) from the wall outlet
Caution: If you leave a still video
(mains) if it is not going to be used for an
image or on-screen display image
extended period of time. When
displayed on your TV for an extended
unplugging the unit, always grip the
period of time via this system, you risk
plug. Never pull the cord itself.
permanent damage to your TV screen.
Should any solid object or liquid get into
Projection TVs are especially
the system, unplug the system, and
susceptible to this.
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
AC power cord (mains lead) must be
Clean this system with a soft cloth slightly
changed only at the qualified service
moistened with a mild detergent
shop.
solution.
Do not use any type of abrasive pad,
On placement
scouring powder, or solvent, such as
Do not place the system in an inclined
thinner, benzine, or alcohol.
position or in locations that are
extremely hot, cold, dusty, dirty, or
On BLUETOOTH communication
humid or lacking adequate ventilation,
BLUETOOTH devices should be used
or subject to vibration, direct sunlight or
within approximately 10 meters
a bright light.
(unobstructed distance) of each other.
Be careful when placing the unit or
The effective communication range may
speakers on surfaces that have been
become shorter under the following
specially treated (for example, wax, oil,
conditions.
polish) as staining or discoloration of the
When a person, metal object, wall or
surface may result.
other obstruction is between the
If the system is brought directly from a
devices with a BLUETOOTH
cold to a warm location or is placed in a
connection.
very damp room, moisture may
Locations where a wireless LAN is
condense on the lens inside the unit,
installed.
and cause the system to malfunction. In
Around microwave ovens that are in
this situation, remove the disc, and
use.
leave the system turned on for about an
Locations where other
hour until the moisture evaporates.
electromagnetic waves are generated.
BLUETOOTH devices and wireless LAN
On heat buildup
(IEEE 802.11b/g) equipment use the
Heat buildup on the unit during
same frequency band (2.4 GHz). When
operation is normal and is not a cause
using your BLUETOOTH device near a
for alarm.
device with wireless LAN capability,
Do not touch the cabinet if it has been
electromagnetic interference may
used continuously at a high volume
occur. This could result in lower data
because the cabinet may have become
transfer rates, noise, or inability to
hot.
connect. If this happens, try the
Do not obstruct the ventilation holes.
following remedies:
Use this system at least 10 meters
On the speaker system
away from the wireless LAN
This speaker system is not magnetically
equipment.
shielded, and the picture on nearby TV
Turn off the power to the wireless LAN
sets may become magnetically distorted.
equipment when using your
In this situation, turn off the TV, wait 15 to
BLUETOOTH device within 10 meters.
30 minutes, and turn it back on. If there is
Use this system and BLUETOOTH
no improvement, move the speakers far
device as closer to each other as
away from the TV.
possible.
54GB
...Dieses Handbuch ist für folgende Modelle:
Stereoanlage - SHAKE-X7D (609.59 kb)