Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Tip ••You can view clock information in power-on mode by pressing CLOCK. Turn on Press . »»The unit switches to the last selected source. EN Switch to standby mode Press again to switch the unit to standby mode. »»The clock (if set) is displayed on the panel. Switch to ECO standby mode: Press and hold for more than two seconds. »»The display panel is dimmed. Note ••The unit switches to Eco Power Standby mode after 15 minutes in standby mode. Switch between standby mode and ECO standby mode: Press and hold for more than two seconds. 4 Play Play from disc 1 Press CD to select the CD source. 2 Press to open the disc compartment. 3 Insert a disc with printed side facing upward. 4 Press to close the disc compartment. »»Play starts automatically. If not, press . CDAUDIO INPRESET/ALBUMMUTESHUFFLECLOCKSLEEPTIMERPROGSOUND FMVOLDISPLAYREPEATSOURCEAUDIO INVOLUMECD Play from USB Note ••Make sure that the USB device contains playable audio content. 1 Press USB/AUDIO IN repeatedly to select the USB source. 2 Insert a USB device into the socket. »»Play starts automatically. If not, press . EN CDAUDIO INPRESET/ALBUMMUTESHUFFLECLOCKSLEEPTIMERPROGSOUND FMVOLDISPLAYREPEATSOURCEAUDIO INVOLUMEUSB Control play / Select a folder. / Select an audio file. Pause or resume play. Stop play. REPEAT Play a track or all tracks repeatedly. SHUFFLE Play tracks randomly. VOL +/- Increase or decrease the volume. MUTE Mute or restore sound. SOUND Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. DISPLAY Adjust display brightness. Skip to a track For CD: Press / to select another track. For MP3 disc and USB: 1 Press / to select an album or a folder. 2 Press / to select a track or a file. Program tracks You can program a maximum of 20 tracks. 1 Press PROG to activate the program mode. 2 For MP3 tracks, press / to select an album. 3 Press / to select a track, and then press PROG to confirm. 4 Repeat steps 2-3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . Play from Bluetooth-enabled devices Note ••The effective operation range between the unit and your Bluetooth enabled device is approximately 10 meters (30 feet). ••Any obstacle between the system and the device can reduce the operational range. ••Compatibility with all Bluetooth devices is not guaranteed. EN SOURCEAUDIO INVOLUME .... 0000PIN BTM2180CDAUDIO INPRESET/ALBUM FM 1 Press FM/ repeatedly to select the Bluetooth source. »»[BT] (Bluetooth) is displayed. »»The Bluetooth indicator flashes blue. 2 On your device that supports Advanced Audio Distribution Profile (A2DP), enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 Select 'PHILIPS BTM2180' on your Bluetooth enabled device and if necessary input '0000' as the paring password. »»After successful pairing and connection, the Bluetooth indicator turns solid blue, and the u...