Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The use of these equipments is regulated by: 1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services. L’uso degli apparati e regolamentato da: 1. D.L.gs 1.8.2003, n. 259, articoli 104 (attivita soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private. 2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai servizi di telecomunicazioni. Latvia Notice A license is required for outdoor use for operation in 2.4 GHz band. - Replace only with a battery of the type recommended by LG. - Caution: Danger of explosion if battery is incorrectly replaced. Replace only the rechargeable lithium battery with LG. Use of Another Cell May Present a Risk of Fire or Explosion. 2 Preparation Contents 5 1 2 3 4 Contents 2 CAUTION 5 Accessories 6 Installation 7 About the unit & Speaker 8 LED status 9 Pairing the speaker and unit manually 10 Listening to music 11 Troubleshooting 11 Specifications Accessories Please check and identify the supplied accessories. Portable cable (1) AC/DC adapter (1) (GFP181T-0920-1) 3 Installation * The actual set may differ from the drawing. a Connect one end to the DC IN socket on the main unit. Connect the other end to the wall outlet. b Combine the unit (wireless transmitter) and speaker (wireless receiver ). c Turn the power on by pressing 1 (Power). d The green color is on. NOTE • Risk of electric shock! When you unplug the AC/DC adapter, always pull the plug from the socket. Never pull the cord. • Contact an electrical parts dealer for assistance in selecting a suitable AC/DC plug adapter or AC/DC cord set. • For operating the unit after purchasing it, you should charge it fully first. Installation 6 3 Installation About the unit & Speaker a 1 Power (on/off) b (Mood lighting) : Press repeatedly to adjust the brightness level and to turn off the mood light. c Speaker (Battery status LED of speaker) d Parts for speaker charging e Unit (Wireless connection status LED of unit) f Volume knob To adjust the volume, press the button first and rotate it as below. The mood light rotates in the direction that you rotate the volume knob. NOTEIf you do not use it for a long time, store it in a safe place with the volume knob pressed for preventing breakage. g PHONES (Headphone jack) A warning that excessive sound pressure from earphones and headphones can cause hearing loss. Installation 7 3 Installation a b Front c d e f Rear g h h When you connect a portable device to the unit. When you connect the device with optical jacks on it to the unit. Connect the portable player to the PORT.IN (PORTABLE IN) connector of the unit. Connect the optical of your component into the OPTICAL IN. Connect one end to the DC in socket on the main unit. Connect the other end to the wall outlet. LED status Combined Separated • Power-on Speaker (LED status battery) LED Combined Separated Green on Charged Red on low battery Unit ( LED status wireless) LED Combined Separated Green on Connected Green blink Not connected Rechargeable Battery • If the unit is unpaired for longer than 2 minutes, it is automatically powered off. • Operating time on the battery: approximately 5 hours 30 minutes • The maximum playing time: approximately 6 hours - It may differ depending on the genre of music and the volume. • Charging time on the battery: approximately 4 hours • The battery operating time may vary depending on the battery status, operational status and environment conditions. • Effective distance: about 10 m (The distance may differ according to surrounding circumstances.) • When the temperature of the unit’s outside is extremely high, the speaker LED blinks green and red alternately and the sound mutes. Then move the unit into a cooler place for normal operation. - If the unit does not work properly even after moving the unit, contact to a LG service center. Pairing the speaker and unit manually You can set up wireless connection manually, when your connection is not completed. Use the unit after charging it fully (for longer than 30 minutes). 1. Connect one end to the DC IN socket on the main unit. 2. Press and hold reset button on the unit until the red light flicker a second on LED. 3. Press the reset button on the buttom of speaker. 4. Combine the speaker and unit. Press 1 (Power) for longer than 3 seconds and then wait five seconds. 5. If the LED on the unit is green, the connection is completed. Listening to music The unit can be used to play the music from many types of portable player or component. 1. Connect the portable or optical output jack of your component into the OPTICAL/PORT.IN jack on this unit. 2. Turn the power on by pressing 1 (Power) 3. Select the PORT. or OPTICAL option by draw...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - PW15K (3.39 mb)