Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• An error occur as bellow. - Your iPhone/iPod is not connected firmly. -This unit recognizes your iPhone/iPod as an unknown device. -Your iPhone/iPod is exceptionally low in power. /The battery needs to be charged. / If you charge the battery while iPhone/ iPod is extremely low in power, it may take longer to be charged. 3 are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. • Depending on your iPhone/iPod’s software version, it may not be possible to control your iPhone/iPod from this unit. We recommed installing the latest software version. • If you use an application, make a call, or send and receive SMS text message, etc. on iPod touch or iPhone, disconnect it from iPod dock of this unit and then use it. • If you have a problem with your iPod/iPhone, please visit Operating 18 Operating 3 Radio Operations Listening to the radio 1. Press TUNER/ST./MO. on the remote control or FUNC. on the unit until FM appears in the display window. The last received station is tuned in. 2. Auto tuning : Press TUN. -/+ on the remote control or Y/U on the unit for about 2 seconds until the frequency indication starts changing, then release. Scanning stops when the unit tunes in a station. Manual tuning: Press TUN. -/+ on the remote control or Y/U on the unit repeatedly. Operating 3. Adjust the volume by using VOL+/-on the remote control or VOLUME-/+ on the unit repeatedly. Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure to turn down the volume. 1. Press TUNER/ST./MO. on the remote control or FUNC. on the unituntil FM appears in the display window. 2. Select the desired frequency by pressing TUN. -/+ on the remote control or Y/U on the unit. 3. Press PROGRAM. A preset number will blink in the display window. 4. Press / on the remote control or PRE(+)/ PRE(-) on the unit to select the preset number you want. 5. Press PROGRAM. The station is stored. 6. Repeat steps 2 to 5 to store other stations. 7. To listen a preset station, press / on the remote control or PRE(+)/PRE(-) on the unit. Improving poor FM reception Press TUNER/ST./MO. on the remote control. This will change the tuner from stereo to mono. Then the reception will be better than before. Deleting all the saved stations 1. Press and hold PROGRAM for two seconds. “ERASE” will blink in the display window. 2. Press PROGRAM to erase all saved radio stations. Operating 19 Seeing information about a Radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types. : PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. RT (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. Using the Auto Station Programme Memory(ASPM) This function lets you automatically search and store 50 stations. 1. Press TUNER/ST./MO. on the remote control or FUNC. on the unit until FM appears in the display window. 2. Press and hold PTY/ASPM for at least 3 seconds. After "ASPM" will blink in the display window, scanning will start. (87.50 - 108.00 MHz) To stop scanning, press PTY/ASPM again. 3. When an RDS station is found, the station will be stored in memory. 4. After scanning, the number of stations stored in memory will be displayed, and then“END” will appear. 3 Operating CT ( Time controlled by the channel) 5. Although you preset stations for FM manually, This shows the time and date as a preset number for a RDS station will be saved broadcast by the station. successively. You can search the radio stations by programme 6. To listen a stored station, press type by pressing RDS. The display will show the last PTY in use. Press PTY/ASPM one or more times to select your preferred programme type. Press and hold TUN. -/+. The tuner will search automatically. When a station is found, the search will stop. / . yIf the same station is broadcast on different frequencies, the strongest frequency will be stored in memory. yIf 50 stations have already been stored in memory, the scan will be aborted. yIf no station have been stored in memory, “0 MEM”and “END” will appear for about 4 seconds. yIf the RDS signals are very weak, station may not be stored in memory. yIf 50 stations is already stored, ASPM will not work. So delete all these stations to search and store new RDS stations in memory. , 20 Operating 3 Operating Deleting all saved RDS stations 1. Press and hold PROGRAM for two seconds. “ERASE” will blink in the display window. 2. Press PROGRAM to erase all saved radio stations. Note Setting the Clock 1. Turn the unit on or off. 2. Press and hold CLOCK for at least 2 seconds. 3. Choose time mode by pressing C/V. -12 HOUR (for an AM and PM dis...