Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Fotos und technische Daten Sony CMT-CX5BIP |
Anleitung Zusammenfassung
connected iPod/iPhone. Note on presetting DAB/DAB+ stations CD player section Changing the display You can preset a DAB/DAB+ service only when it can be received. No Text (DAB/DAB+ only) : There is no text information the desired file. Tip The iPod/iPhone does not function. System: Compact disc and digital audio system in the received service. Laser Diode Properties The Play Timer setting remains as long as the setting is not cancelled .If the battery of the iPod/iPhone is empty, it may not To Press Emission Duration: Continuous manually. Not in Use : You tried to perform a specific operation work with this system. In such a case, recharge it with a Laser Output*: Less than 44.6.W Change DISPLAY . repeatedly when the under conditions where that operation is prohibited. computer, etc. then connect it to the system. * This output is the value measurement at a distance of 200mm from the Playing the iPod/iPhone information on system is on. Troubleshooting Not Supported : An unsupported iPod is connected or objective lens surface on the Optical Pick-up Block with 7mm aperture. .Shut down any other iOS applications running on the Frequency response: 20 Hz . 20 kHz the display1) the iPod/iPhone whose battery is empty is connected. iPod/iPhone. For details, refer to the operation manual Signal-to-noise ratio: More than 90 dB 1 Select the iPod function. Change Display DISPLAY . repeatedly when the Push STOP! : You pressed PLAY MODE . during Dynamic range: More than 90 dB Press FUNCTION +/.. repeatedly. mode (see below.) system is off.2) Selected track or file number Total playing time of the selected supplied with the iPod/iPhone. playback in the CD function. Tuner section track or file .Make sure the iPod/iPhone is connected securely. FM stereo, FM superheterodyne tuner 2 Place the iPod/iPhone. 1) For example, you can view CD/MP3 disc information, such as; 1 Make sure the power cord and speaker cords are .Make sure the iPod/iPhone is updated with the latest Step Full! : You tried to program more than 25 tracks or Tuning range: 4 Program the selected track or file. .track or file number files (steps). correctly and firmly connected. software. If not, update the iPod/iPhone before using 87.5 MHz . 108.0 MHz (50 kHz step) Press . to enter the selected track or file. 3 Start playback. .track or file name (“ ”) TIME NG! : The Play Timer start and end times are set to Antenna: FM lead antenna Press ... .artist name (“ ”) 2 Find your problem in the checklist below, and take the same time. DAB/DAB+ tuner section: with the system. 5 Repeat steps 3 through 4 to program additional .Because the operation of the system and the iPod/ ”) the indicated corrective action. FM stereo, DAB/FM superheterodyne tuner .album or folder name (“ tracks or files, up to a total of 25 tracks or files. iPhone are different, you may not operate the iPod/ Frequency range* To control the iPod/iPhone .total playing time and total number of tracks on the CD-DA If the issue persists, contact your nearest Sony dealer. Band-III: 174.928 (5A) MHz . 239.200 (13F) MHz disc (only when Normal Play mode is selected and the player is iPhone using buttons on the remote or unit. In this 6 To play your program of tracks or files, press ... * For details, see “DAB/DAB+ frequency table” below. To Press stopped). case, use the control buttons on the iPod/iPhone. Antenna: DAB/FM lead antenna The program remains available until you remove the Pause playback . (pause) ./. (stop) .. .total number of folders (albums) on the MP3 disc (only when If the STANDBY indicator flashes The DAB/DAB+ services are available only in countries/regions that support disc from the disc slot . or unplug the power cord. Normal Play mode is selected and the player is stopped). The iPod/iPhone cannot be charged. PrecautionsDAB/DAB+ services. Immediately unplug the power cord, and check the Select a track . (go back)/. (go forward) To play the same program again, press ... .volume label if it exists on the MP3 disc (only when Normal Play .If the battery of the iPod/iPhone is empty, the system following items. or chapter of .. To fast-forward or fast-rewind, mode is selected and the player is stopped). DAB/DAB+ frequency table (Band-III) Discs that this system CAN play may not be able to charge it even if you connect it to the audiobook/ hold down the button. You can also view DAB/DAB+ station information such as the .Are the + and . speaker cords short-circuited? Press PLAY MODE . repeatedly until “PGM” To cancel Program Play Frequency Label system. In such a case, recharge it with a computer, etc. .Audio CD service name, channel label, preset number, frequency, DLS podcast .Is anything blocking the ventilation holes of the 209.936 MHz 10A then connect it to the system. .CD-R/CD-RW (audio data/MP3 files) (Dynamic Label Segment), or ensemble label. system? disappears while the player is stopped. Find a point in a Hold down . (rewind)/. (fast 211.648 MHz 10B .Make sure the iPod/iPhone is connect...